Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

New Rules for the control of VHS


Recommended Posts

Here's a press release from the DNR about VHS;

SUBJECT: NRB acts to contain a deadly fish virus believed to be in Lake Michigan

Anglers and boaters required to take precautions to prevent spread

MADISON – To prevent a new and deadly fish virus from spreading to walleye, musky, yellow perch and other fish in Wisconsin inland waters, effective Saturday, April 7, anglers and boaters are required to take steps to help confine the virus to waters where it’s already found or suspected.

The state Natural Resources Board on Wednesday, April 4, unanimously passed emergency rules prohibiting anglers and boaters from moving live fish, dead fish, and water out of Wisconsin’s Great Lakes waters, the Mississippi River and those waters’ tributaries up to the first dam.

Wisconsin officials believe Viral hemorrhagic septicemia virus, or VHS, is likely present in these waters or will soon be because they are connected to waters where the virus has been found.

VHS is not a threat to human health but it caused major fish kills in 2005 and 2006 in lakes St. Clair, Erie, Ontario and the St. Lawrence River, and the virus was discovered in Lake Huron fish in February, according to Mike Staggs, Wisconsin’s fisheries director.

“This deadly, invasive virus is a very serious threat to our fisheries and to Wisconsin’s $2.3 billion fishing industry,” Staggs says. “We don’t want anglers and boaters to accidentally spread it from where it already is, or from where we think it already is.”

Because the virus can infect so many different ages and species of fish, VHS could spread more quickly in inland lakes, which are much smaller than the Great Lakes, potentially devastating fish populations and fishing opportunities. Walleye, spotted musky, yellow perch, blue gill and northern pike are all susceptible to the virus, as are common bait species such as emerald and spot-tail shiners.

The rules, which are similar to measures other Great Lakes states have taken, require anglers and boaters to:

• Be careful with live bait. If you want to use crayfish, frogs, fish, or fish eggs as bait, they must be purchased from a Wisconsin bait dealer OR captured legally in the water you’ll be fishing OR captured in an inland lake or stream and used in another inland lake or stream. Leaches, worms, and insects are OK.

• Be careful with dead bait. If you want to use dead fish, fish eggs, crayfish, or frogs they must be used only on Lake Michigan (including Green Bay and tributaries up to the first dam) OR used on the inland lake or stream where it was captured OR preserved by means other than refrigeration or freezing, neither of which is assured of killing the virus.

(more)

• Don’t take live fish off the Great Lakes or Mississippi River. You may not take live fish or fish eggs (including both bait and game fish) away from Lake Michigan, Lake Superior, the Mississippi River or any of their tributaries upstream to the first dam or barrier impassable to fish. This includes fish caught and kept in livewells, leftover bait, or any minnows or fish eggs being collected for bait. There are some limited exceptions; contact your DNR office for information for those situations.

• Drain your boat and live well and empty your bait bucket before you leave the landing. After fishing or boating on the waters of the Great Lakes or Mississippi River (including tributaries up to the first dam), you must must immediately drain all water from the boat and boat trailer, bilge, live well and bait bucket. Place unused bait in the trash.

• Notify DNR if you see a fish with hemorrhages on its skin. Call your local DNR fish biologist to help the agency monitor state fish populations for the virus. DNR is testing wild fish from Lake Michigan and Lake Superior this spring and will respond to fish kills.

“The states in the lower Great Lakes didn’t know about the virus and how it was spread until it was too late,” Staggs says. “Anglers and others were already accidentally moving the virus around. We now have the benefit of knowing that the virus is likely here and that we must take steps to prevent its further spread. We truly need anglers’ and boaters’ help in protecting Wisconsin’s fishing future, the health of our waters, and the local economies they anchor.”

DNR fisheries and other staff who work on the Great Lakes are taking the same prevention steps with their boats, and are disinfecting all eggs collected from Great Lakes fish before they are brought into state hatcheries, and are taking other measures to keep the virus from being accidentally spread to wild and hatchery-raised fish.

Until recently, the virus was known to be present only on the East and West coasts of the United States, in Europe and in Japan, may have arrived in the Great Lakes in ballast water from a commercial ship or through the movement of wild fish. It infects cells lining blood vessels, causing severe hemorrhaging and death. So far, most fish kills due to the virus in the Great Lakes occurred right after ice out, continuing until water temperatures reached 59 degrees Fahrenheit.

Learn more about VHS by visiting DNR’s Web site: http://dnr.wi.gov/fish/pages/vhs.html.

Link to comment
Share on other sites

I saw this on the news! said that you can only use bait in wisconsin that is from wisconsin. they also made it sound like boundry waters were included in this new law. does that mean that everyone fishing the St. Louis on opener is going to need to buy their bait in Superior? and how will they be able to tell where the bait is from- bait stores I go to don't give out reseats?

anybody know anything more about the bait law?

Link to comment
Share on other sites

That's a good question. It seems a little vague in that respect, almost as if the minnows were caught in the St. Louis then you can use them. I have been emailing a member of the DNR for the last few days so that I can post more info to help everyone out, when I get some I will post it right away. Remember, this is a neccesary measure to try and control the spread of VHS.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.