Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Whats the safest way to heat a sleeper?


Boar

Recommended Posts

I heat my sleeper with a vent free wall mounted heater. I dont like the fear factor of carbon monoxide poisoning.I open a window on either side to get some free flowing air through. It helps but I do get a headach from time to time. I would like to run electric off a generator but dont want the hassle. Dose anyone heat with a vented wall mount propane heater? Where can I find one, how much do the cost, an are they easy to install? Thank you Boar

Link to comment
Share on other sites

There are several options. But you can't fight the numbers. Almost all sleepers use LP. A direct vent seems to be a good way to go. Not the cheapest. Just make sure you have a vent near you heater for Oxygen. And put a vent in the house as high up as you can to allow co to get out of the house. You can get a RV co detector that will sound an alarm. Electric seems to be the safest but IMO it is not practical.

Good Luck!!!!!

Link to comment
Share on other sites

Hey guys thanks for youre input. Option two is not acceptable, I fish to get away from my very attractive partner/wife hee hee. but after consulting this forum an others near me, i think that for the money I will stay with my current heat source for now which is propane vent free, I'm gonna install a booster fan near the ceiling or midway an put a vent down low on adjacent wall, power the the booster fan with a optima deep cycle battery an purchase a solar panel trickle marine charger to have constant charge to the battery. If I remember right Carbon Monoxide detectors are to be placed near the ceiling right? Its hard to do that at home cause all your outlets are near the floor. If any one knows the answer to that Q's please address it. Oh yea I need an Rv CO detector too. Thanks later Boar

Link to comment
Share on other sites

boar make sure you get a big enuff solar panel if you fish alot. i know you are not running much off of the optima. but for a suffecient charrge you will need at least a 450watt plug and play type charger and those will run you about $450-500 i have done alot of research on these solar chargers and have posted here on the very subject. ... paul

Link to comment
Share on other sites

A note: newer vent free heaters have o2 depletion shutoffs so it makes them quite save indoors. This is from the Consumer products safety commision web site: (ps .. still have a CO detecter)

"This summer, as friends, families, and outdoor enthusiasts head out to campsites, the U.S. Consumer Product Safety Commission (CPSC) is announcing that there is a new generation of portable heaters with a safety device that can prevent the tragic loss of life due to carbon monoxide (CO) poisoning. The new heaters are equipped with an oxygen depletion sensor (ODS) and are safer to use when camping. If oxygen levels start to fall, this sensing technology automatically shuts down the heater before it can produce serious levels of CO.

Unlike earlier portable heaters that do not have an ODS and are intended for outdoor use only, the new ODS-equipped heaters are specifically designed for indoor use. They can be safely used inside tents, cabins, and campers, but it is essential that users comply with the manufacturers' instructions to ensure that there is adequate ventilation. CPSC still recommends shutting off any camping heater or lantern before going to sleep.

CPSC estimates that in 1998, the latest year for which data are available, 18 people died due to carbon monoxide poisoning associated with using portable propane heaters indoors. Many of these deaths could have been prevented if the victims had been using the new heaters. These deaths often occurred when consumers brought radiant camping heaters that used 1 lb. propane tanks (but did not have an ODS) inside tents, campers, and other vehicles, thus exposing themselves to high levels of CO. "

Link to comment
Share on other sites

Thanks perch for taking the time on that one. My current vent free wall mount in my sleeper has the ODS but I'm still not going to gamble my life or my kid's or freinds on a little sensor. I'm just trying to do what ever it takes short of spending a small fourtune on staying safe but if spending a small fourtune is what it take then i will. Yhanks again. Later Boar

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
    • Chef boyardee pizza from the box!
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.