Lowrance Question

[78cj5]

Can I slave my 102C (trolling motor mounted transducer) on the bow to my 332C on the dash so it is showing the same picture (without the GPS)?

Basically, a second monitor for the 332.

Is this possible without adding a second transducer to the stern?

[PerchJerker]

I'm not 100% clear on what you're asking, but it sounds like you have 1 transducer that you want to use on two units? You can do this if you buy a switch from Lowrance, but you could only read the transducer with 1 unit or the other at a time --- not both at the same time.

[SteveWilson]

Nope. If your two units can use the same transducer then you can put them on a switch. However, to get it the work properly you need to turn off the unit that has the transducer, switch to the other fishfinder, then turn that second fishfinder on. Otherwise the fishfinder has problems locking on to the signal. Your other option is to mount a second transducer, just make sure it's away from the other transducer.