1994 Lund 1775 Pro-v

[archer59]

Does anyone have a manual for a 94 Pro-v? Or one they could copy for me. I'd like the info for the livewells, along with everything else of course. Let me know what you have.

Thanks,

Nick

[Wave Runner]

Even now, but especially back then, Lund boat manuals were especially useless....

[marine_man]

I agree... they were pretty basic.. be sure to put the plug in your boat before going out, to operate the livewell, and so on...

Are you looking for any information in particular?

marine_man

[archer59]

Quote:

---

I agree... they were pretty basic.. be sure to put the plug in your boat before going out, to operate the livewell, and so on...

Are you looking for any information in particular?

marine_man

---

The rear livewell doesn't want to hold water. Not sure if the slide adjustment is working right or not. I normally wouldnt' care seeing I have the front well, but my bait bucket is in the back on my tiller.

Nick

[marine_man]

Presuming you're sliding the fill valve to fill, and have the livewell plug in (and your sure it's not the plug that is leaking) it's in the valve, or the adjustment of it.

Pull the valve access hatch (either right before the step up to the bow deck in the center of the boat, or right in front of the rear compartments) and start adjusting the valve in question - it's just a cable, like a lawnmower throttle cable, so you should be able to figure it out.

Good Luck!

marine_man

[deadminnowcatcher]

I had to replace the valve in my pro v. The valves are not made very good. I took mine apsrt and could not believe how cheap it was made

[archer59]

I'll take a look at the plug and valve and see what I can come up with. Thanks for the info.

Nick