330 hookup to 332 lowerance

[sdaksteve]

Im courious to the power hook up and data shared information for these two graphs?

[marine_man]

I'm not sure if this will help or not... but there was a lot of similar information on this thread:

Another Wiring Question

Good Luck!

marine_man

[Satchmo]

The 330 is not NMEA 2000 compatible, so the only way to network it is through the multi colored data wires and programing the units correctly to export and import the data. The power connection are described in the above referanced thread. You only power the GPS module with ONE of the units, if you power it up twice you WILL have problems.

[sdaksteve]

Thanks guys, I've hooked up everything with no problems. I placed the 334 by the dash and the 330 by the new 70AP on the front. The new Ram puck mount works great on the front unit to run both the 332 and 330. Thanks again Sdaksteve