walleyewizard Posted July 14, 2004 Share Posted July 14, 2004 We want to mount downriggers to a board that we can remove from the boat. We have a Crestliner with extended transom. Any ideas out there? Link to comment Share on other sites More sharing options...
0 SuddenlySummer Posted July 14, 2004 Share Posted July 14, 2004 My friend had a 27' Sea Ray that we did that too. We were able to ratchet down the board to the transom using several cum-alongs. Worked well. [This message has been edited by SuddenlySummer (edited 07-13-2004).] Link to comment Share on other sites More sharing options...
0 Surface Tension Posted July 14, 2004 Share Posted July 14, 2004 You should be able to buy removable mounts for any downrigger. Or are you thinking about a transom rail to mount riggers and rod holders onto? Link to comment Share on other sites More sharing options...
0 E.Martin Posted July 14, 2004 Share Posted July 14, 2004 I made a mount last year for my Yarcraft out of two rod holds for a pair of Cannons. It works great. If you would like some pics, send me your email ([email protected]) and send them to you. I would post them, but I don't know how.Eli Link to comment Share on other sites More sharing options...
0 walleyewizard Posted July 14, 2004 Author Share Posted July 14, 2004 Surface Tension, we would like to mount the mounts to a 2x6 and mount the board to the boat. Any ideas? E.Martin, you've got mail! Link to comment Share on other sites More sharing options...
0 IrishZit Posted July 14, 2004 Share Posted July 14, 2004 WW-Take a look at the Versa-Ball mounts. They sell them at Cabela's and I'm sure many other places.This is a fresh topic for me because I was doing research on how to mount my newly aquired riggers.Good luck!Sully Link to comment Share on other sites More sharing options...
0 E.Martin Posted July 15, 2004 Share Posted July 15, 2004 WW - try resending, my spam filter bumped you.Eli Link to comment Share on other sites More sharing options...
0 Surface Tension Posted July 15, 2004 Share Posted July 15, 2004 Mounted to a 2x6 on pedestal mounts which elevate your downriggers is called a transom rail or side rail. You can also attach flush mount rod holders to the rail. Is this what your looking for? If so, then you would attach to bases to the boat. Then your pedestal attach's to the bases with hand bolts. The 2x6 mounts on the pedestals. If this isn't what your asking then theres no reason to attach them to a 2x6. If your looking for removable mounts for downriggers then just buy the base and use the hand nuts to attach the rigger to the base. Link to comment Share on other sites More sharing options...
0 Paul Waldowski Posted July 15, 2004 Share Posted July 15, 2004 Here's what I did using a product called Eagle's Feet. No holes to drill and they go on and off in under 30 seconds. ------------------PaulDrake Motel [email protected]MarcumOtter OutdoorsJR's TackleLakemaster Lake Maps Link to comment Share on other sites More sharing options...
0 walleyewizard Posted July 20, 2004 Author Share Posted July 20, 2004 Thanks for all your replies. I think we are good to go with downriggers and flat lines. This is the best web-site to get any kind of information you need. Thanks again. Link to comment Share on other sites More sharing options...
Question
walleyewizard
We want to mount downriggers to a board that we can remove from the boat. We have a Crestliner with extended transom. Any ideas out there?
Link to comment
Share on other sites
9 answers to this question
Recommended Posts