Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Crow Lake and Lake of the Woods Report


Recommended Posts

Fishing Conditions"

With another weekend upon us I have been out fishing again. The trout picked up today and we landed 5 this morning with several others getting away with sore mouths. We went over to Stevens Bay for crappies again in the afternoon and it again was great. It has been good for the last few weeks but with the cold front they got finiky and it took some more paitence to hook the many that we were marking. I did best with small ratsos with a spring bobber but others were doing good with small teardrops and gulp maggots. For trout I was using Jigging Shad Raps and also white and glow tubes. I found many small perch and shiners inside the trout stomachs so trying anything with shiner or perch colour combinations would be effective. The thermometer is supposed to be rising for the rest of the weekend and continue to rise by early next week. The ice conditions are great. Crow has 14-16 inches of ice on the main parts of the lake with 6 inches of granular snow cover. I didnt find any slush at all. Lake of the Woods has nearly 24 inches of ice in most places with some spots near 30 inches. The trail to Hay Island is in great riding condition. The trails to Otterskin and Rowan are also in good condition. Hope everyone gets a chance to come up and do some fishing. And remember to feel free to call and get up to the minute reports. Good Luck,

Robin Holden,

Muskie Bay Resort

wink.gif

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.