Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

First Time for Everything


Mr. Pike1

Recommended Posts

Well today was a first for me. A rain out in January. I had just got into good sunfish bite and was hit by a mild down poor. That combined with a nice little breeze finally forced me of the hard water. Thank God I had my ice cleats on as it was slick and little layer of water made it evern slicker.

Link to comment
Share on other sites

Pike...Usually when we get rain in January, everything gets covered in ice...I guess we can be thankful that the temp has stayed above freezing...to this point anyways...tonight might bring a different story? If we have to have it at all, I for one will take the rain over the ice anyday!

Link to comment
Share on other sites

Ice Fishing in the rain is something that we shouldn't have to worry about. But for some darn reason, its becoming a more common occurrence.

I was putzing around on Medicine Lake tonight when it started to rain. Yuck! I was on such a good bite that I didn't even bother to set up my shack and just kept fishing in the rain. A couple guys about my age came over and asked me if I was "Hardcore". grin.gif I kind of smiled.

They proceeded to ask if I was catching anything and I was pounding them. "You bet," I said. I pulled in a couple sunnies while they were talking to me. Apparently they weren't doing so well. They asked about crappies and I told them I'd probably landed more crappies than gills. The one guy yells back to his other buds in the shack to put a minnow on since I was getting crappies... little did they know I wasn't catching them on minnows. smirk.gif

Anyway, got sidetracked there.

Rain sucks!

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
    • Chef boyardee pizza from the box!
    • Or he could go with leech~~~~~
    • Bear can relate too. Tell Leech to start a new account named Leech5, we'll know who he is.If he has any trouble, Bear can walk him through it.
    • Blessed Christmas to all.  
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.