MJBo Posted January 10, 2006 Share Posted January 10, 2006 Not sure why I'm having so much of a problem with this, but how do I get a water temp reading from my LMS332C? Link to comment Share on other sites More sharing options...
0 dockehr Posted January 10, 2006 Share Posted January 10, 2006 Are you using the correct transducer. Older transducers will work (pre-blue connector), but, will not display water temperature.If that's not the issue, then go to sonar setup or digital display setup and make sure that the correct squares are checked.dockehrDr. Roland E. Kehr, Jr.Lindy Tckle Company Link to comment Share on other sites More sharing options...
0 Lindy Lee Posted January 14, 2006 Share Posted January 14, 2006 Make sure to read the manual about what you can have showing on the screen. I ran a 332c last summer & could not understand why I could not have the speed displayed on the screen. I like to use This while trolling & also pulling the kids on the tube. After I put the boat away opened up the owners manual & there it was in black & white on how to turn on the speed. Works great now. Remeber to check Lowrance's HSOforum as they sometimes offer free upgrades. Link to comment Share on other sites More sharing options...
Question
MJBo
Not sure why I'm having so much of a problem with this, but how do I get a water temp reading from my LMS332C?
Link to comment
Share on other sites
2 answers to this question
Recommended Posts