Stu Posted December 29, 2005 Share Posted December 29, 2005 I am looking seriously at a used 1999 Lund 1900 Pro V SE. Unfortunately, it has only a drivers side console/windshield and I want my wife to be protected from the wind and rain when I am driving the boat. Is it possible to order or find a console that can be installed on the passenger side from Lund or from another source?Are there aftermarket products that can be installed to protect the passenger?Thanks for your help.Stu Link to comment Share on other sites More sharing options...
ChuckN Posted December 29, 2005 Share Posted December 29, 2005 On some boats you can add a second console. I've seen more dual console 1900 series boats than single consoles. Contact Lund directly with your questions and I'm sure you can purchase one. Should be relatively easy to install. The rod/storage locker set-up is the main concern, but it should work. Link to comment Share on other sites More sharing options...
Valv Posted December 29, 2005 Share Posted December 29, 2005 It's going to be tough to find a console for it, and there's nothing "generic" on the market (which I feel would decrease value of boat since it will not match other side). You should contact Lund, but beware it will not be cheap.Console walls are just aluminum with carpet, but the console top, windshields, glove compartment, etc are very expensive to buy.You might want to consider another boat with already dual console or a full windshield. Link to comment Share on other sites More sharing options...
DougSpringBay Posted December 30, 2005 Share Posted December 30, 2005 Stu,Contact Lund directly. They have excellent cutstomer service. They should be able to hook you up with a console The only problem might be that they have redesigned consoles for the Pro V since 1999, so it may not match. Dual console is an option, and many come from the factory to dealers as single console boats, if they are not pre-sold ordered boats. That allows the dealer to sell to either a dual or single console buyer and the dealer will order and install the port console if the buyer wants to. I have installed a port console on one of my Pro Staff boats for the buyer. It is not hard at all. But once it is in, its in. You have to drill holes in the top of the gunwale. You should expect to pay about $700 to $800 for it from Lund complete with windshield.Good Luck!!!!Doug Link to comment Share on other sites More sharing options...
Stu Posted December 30, 2005 Author Share Posted December 30, 2005 Thank you all for your advice. I am checking with a local Lund dealer to try to get one from Lund.Stu Link to comment Share on other sites More sharing options...
Stu Posted January 2, 2006 Author Share Posted January 2, 2006 Since my post, I found out from a local Lund dealer that they can get a port console from Lund for me and install it.I bought the boat and brought it home on Saturday. Now it's perfect for us.Thanks again.Stu Link to comment Share on other sites More sharing options...
Recommended Posts