So I am fishing a tourney Saturday morning, catch my first fish, turn on the livewell and throw the fish in there. A little bit later I catch a second fish and go to throw it in the livewell and notice its only about half full. I turn the switch from auto to manual to see if the pump is working and I get nothing. Then I realize the light on the auto/manual switch is not on(it must have been working at first in order to fill the tank half way). I first checked my fuses then checked what wiring I could see. I have no idea what is wrong?!?!?! Anybody had this problem or know where I should start troubleshooting? Is it possible my switch went bad??? I don't think the pump is the problem since the switch is not even lit up. I was going to try and bypass the switch but there are like 5 or 6 wires going into it and I didnt' know which ones to jump. Is there a wiring diagram for this anywhere? I have a 98' Tracker PT185.
Wasn't terrible at a state park beach. Antelope island maybe. I wouldn't recommend it as a beach destination tho. Figured I was there, I'm getting in it.
The water looked and smelled disgusting with hundreds of thousands of birds sh*tting in there. About as gross as the Salton Sea. When I duck hunted there I didn't even want to touch the water.
It's kinda gross with the algae in the summer but I got in it anyway. Wanted to see the increased bouyancy at work. You can kinda tuck yourself into a ball and you'll just float with your head above water. When dry off you look diamond encrusted with the salt.
We went to the flats too. I dipped a tire on the rental car onto it just to say I’ve been there,but it was still pretty soft from winter melt. After seeing some moron in a BMW suv get dragged out of the muck I had no intention of repeating his stupidity.
Question
blakjack23
So I am fishing a tourney Saturday morning, catch my first fish, turn on the livewell and throw the fish in there. A little bit later I catch a second fish and go to throw it in the livewell and notice its only about half full. I turn the switch from auto to manual to see if the pump is working and I get nothing. Then I realize the light on the auto/manual switch is not on(it must have been working at first in order to fill the tank half way). I first checked my fuses then checked what wiring I could see. I have no idea what is wrong?!?!?! Anybody had this problem or know where I should start troubleshooting? Is it possible my switch went bad??? I don't think the pump is the problem since the switch is not even lit up. I was going to try and bypass the switch but there are like 5 or 6 wires going into it and I didnt' know which ones to jump. Is there a wiring diagram for this anywhere? I have a 98' Tracker PT185.
Any help would be MUCH appreciated.
Thanks,
Alex
Link to comment
Share on other sites
1 answer to this question
Recommended Posts