FishinFix Posted August 2, 2005 Share Posted August 2, 2005 I have an 1978 9.9 Johnson that is not peeing to her full potential. I replaced the impeller and still not working. Please help me out.Thanks Link to comment Share on other sites More sharing options...
0 Surface Tension Posted August 2, 2005 Share Posted August 2, 2005 Was the old impeller in tact? Could be a few things. The rubber grommet which the water tube goes into could be crushed or damaged. Or an obstruction somewhere in the block and lastly the thermostat could be bad or plugged. Try compressed air into the tell-tale and try it again with the muffs on. Link to comment Share on other sites More sharing options...
0 Pat K Posted August 2, 2005 Share Posted August 2, 2005 Push a foot long piece of weed whipper line into the tell tale hole while the motor is running. It will dislodge bits of weeds or leaf that might be blocking the tube. Link to comment Share on other sites More sharing options...
Question
FishinFix
I have an 1978 9.9 Johnson that is not peeing to her full potential. I replaced the impeller and still not working. Please help me out.
Thanks
Link to comment
Share on other sites
2 answers to this question
Recommended Posts