rack vs. rotary steering

[fish-n-geek]

Mounting a 40hp on the pontoon I'm rebuilding and I don't really want to put the old push/pull cable steering back on. Assuming that a rack and pinion will physically fit inside the helm, what are the pros/cons to going with r&p or rotary steering systems?

-rus-

[BIG DS]

The rotary is hydralic and is a bit more expensive and not really needed unless you are over 115hp. The r&p will fit fine and do the job great for less $$ on your 40. Make sure you measure it properly so you get the right length cable.

[Valv]

Actually the rotary is not hydraulic, but mechanical.

I don't think you can find r&p anymore, they all switched to rotary.

Check Teleflex web site, it has a nice guide to help you choose the helm style.

Then email me for best prices....

[BIG DS]

Sorry, you are right, apparently had my head screwed on sideways when I wrote that. I was having a senior moment.

[Valv]

No problem, I do have many of these days myself too.

In fact they are getting more frequent lately....must be the heat or the afe....