Depth finder differences?

[bgfish00]

What was the difference in the SLT and the SE they have out now?

[Surface Tension]

From what I gather brighter LEDs and a change in the interference reduction.
Suppression like the FL 18 would have been a nice addition.

[Guest]

The Vexilar FL-8 SE incorporates the super bright super fast display and new enhanced interference rejection.

The FL-8 SE is a supercharged version of the FL-8 SLT.

High Resolution Display: 525 Bits
High-Speed Real-Time LED Readout
Backlit Depth Scale for Easy Visibility in Low Light Conditions
Three-Color Display: Red = Strong Signal / Orange = Medium / Green = Weak
Six Depth Scales: 20', 30', 40', 60', 80', and 120' or 240' (Deep Model)
Exclusive Interference Rejection: 10 Step
Power and Sensitivity: 400 Watts Peak-to-Peak
Frequency: 200 kHz
Target Separation: 2.65"
Target ID: 1"
Weatherproof High Impact Case
Dimensions: 4.4"H x 6"W x 2.5"D - Weight: 1.1 lb.
Voltage: 12 VDC - Current draw: 275 MA
Wide Variety of Transducers and Accessories Available
Transducer: 3-Pin - Transom Mount, Puck, or Ice Fishing
Cone Angle: 9°, 12°, 19° (standard), or Dual 9/19 Beam
Warranty: 2 Years

------------------
BACKWATER GUIDING
701-281-2300
[email protected]
><,sUMo,>

[This message has been edited by Rick (edited 11-24-2003).]

[minneman]

If Im in need of replacing my ducer on either unit, be it fl8 slt/se or fl18, could I assume that all ducers are interchangeable for all Fl units?? like say the 12 deg on an fl8 slt, will this work properly?

[Guest]

Yup!