Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

A quick "Thank You"!!!


Neighbor_guy

Recommended Posts

I meant to get this posted yesterday but ran out of time.

I actually got out on the lake this past Saturday spending the morning on one lake and the afternoon on another. On both occasions when I left the lake I drove around slow looking for exposed blocks and marked holes. The plan was to take the ax and bust up anything that had been abandoned....

... NOTHING!!! ....

I fished two very popular Isanti County lakes one of them green in color and name and the other right next door. In both cases I found several well marked holes. And in both cases I did not find a single block that had been pulled and left on the ice.

Well done!!! If you fish either of those lakes and lurk, read, or post here on the forum thank you for taking the time to do it right.

Link to comment
Share on other sites

I often wondered how blocks of ice wouldn't end up down the hole, but I've never had a permanent house so what happens when a person comes out to move their house and they have their blocks outside of it? The hole is frozen over. I suppose you could chip the blocks out and take the blocks home, but I can't imagine that you'd haul them to your new spot and push them under the ice with the new block you just cut. Busting them up probably is the way to go.

Link to comment
Share on other sites

If the hole has a thin layer of ice on it I would break it open and push the blocks in. If it's too thick I generally bring a sledgehammer or as NG said an axe and try and break them down a bit. But the important part is to mark the hole nonetheless

Link to comment
Share on other sites

On my way out to the portable I left out overnight on Peltier in Centerville I noticed the big block on the ice that probably was from earlier this week. I made a mental note to break it up on my way off this afternoon since it was maybe 30 yards from the "road". By the time I drove off someone (probably the same person) had cut another hole, speared, and left leaving two big blocks on the ice. At least I could push those two back in the hole and only had to break up the other one with my chisel that was too far from the new hole to move. I wasn't too impressed with the two pencil thick 1 1/2 foot twigs used to mark the hole either so I dragged over a log which was used to mark a hole cut earlier this winter. Shees! At least the hole should freeze up good tonight. I'm calling it a season since I only saw three small fish in eight hours. That's what I get for being in six feet of water with two feet of ice and three feet of weeds!

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • Sounds pretty sweet, alright. I will check them out, thanks.
    • If you really want to treat your wife (and yourself) with a remote operated trolling motor, the Minn Kota Ulterra is about easy as it gets.  Auto stow and deploy is pretty awesome.  You just have to turn the motor on when you go out and that the last time you have to touch it.   24V 80lb.  60 inch shaft is probably the right length for your boat.  They ain’t cheap - about $3k - but neither one of you would have to leave your seat to use it all day.
    • Wanderer, thanks for your reply. I do intend for it to be 24 volt, with a thrust of 70-80. Spot lock is a must (my wife is looking forward to not being the anchor person any more).  With my old boat we did quite a lot of pulling shad raps and hot n tots, using the trolling motor. Unlikely that we will fish in whitecaps, did plenty of that when I was younger. I also need a wireless remote, not going back to a foot pedal. We do a fair amount of bobber fishing. I don't think I will bother with a depth finder on the trolling motor. I am leaning toward moving my Garmin depth finder from my old boat to the new one, just because I am so used to it and it works well for me. I am 70 years old and kinda set in my ways...
    • Dang, new content and now answers.   First, congrats on the new boat!   My recommendation is to get the most thrust you can in 24V, assuming a boat that size isn’t running 36V.  80 might be tops?  I’m partial to MinnKota.     How do you plan to use the trolling motor is an important question too.     All weather or just nice weather?   Casting a lot or bait dragging?   Bobber or panfish fishing?   Spot lock?  Networked with depth finders?  What brand of depth finders?
    • We have bought a new boat, which we will be picking up this spring. It is an Alumacraft Competitor 165 sport with a 90 horse Yamaha motor. I will be buying and installing a trolling motor,  wondering if I can get some recommendations on what pound thrust I will want for this boat?  Also, I will be selling my old boat, is there a good way to determine the value on an older boat ( mid-80's with a 75 horse 2-stroke  Mariner motor)  I will appreciate any help with these questions.
    • Sketti...  not out of a jar either!
    • Lol yeah I watched that
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.