FHFO Posted November 4, 2014 Share Posted November 4, 2014 I have a 3 LNB DIRECT dish. A receiver have been trying to get it set up. It keeps coming up no signal. I finally came across a test menu. It says internal tests=ok external =fail. SWM fail error 0x45. I found this dish at a garage sale could it be bad? Getting close to ice fishing. HELP Quote Link to comment Share on other sites More sharing options...
acesinthehole Posted November 4, 2014 Share Posted November 4, 2014 I know some of the new boxes will not work with out swim hook up. But if you have the right box you will need to change the Sat type in the set up. I tried the same thing you are doing and it was a pain trying to get HD. I gave up and just went with the auto Sat. The only down side is no HD but way faster! Quote Link to comment Share on other sites More sharing options...
BartmanMN Posted November 4, 2014 Share Posted November 4, 2014 My Directv dish at home had to have the SWM hooked up to receive a signal. Quote Link to comment Share on other sites More sharing options...
Hawg Posted November 4, 2014 Share Posted November 4, 2014 Without knowing your setup did you know you need an active card in the receiver box? The dish also has to be compatible to the receiver? Search-there are lots of posts on this.Find a friend that's done it, it's very simple once you catch on. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.