kicker steering

[jwmiller33]

I have a 9.9 kicker tiller that I do a lot of trolling with. The main motor on the boat is a 225hp Merc that is mounted on a jack plate (herein lies the problem). I wanted to get one of those arms installed that is mounted on the big motor and attaches to the kicker motor so that when you turn the steering wheel on the big motor, it steers the kicker. What I am trying to accomplish is being able to steer the kicker from the driver seat with the steering wheel. I realize the throttle will still be controlled from the tiller arm and that is not a concern. I brought the boat into a shop in Duluth to install the steering arm and they said they couldnt do it because of the jackplate. Other than getting an entire power steering system installed for the kicker, does anybody have any ideas for a way to tether the main motor and kicker motor steering together? I was thinking maybe there was a way to install the steering arm so that it isn't permanent meaning that I can simply attach it somehow when needed so the jackplate movement wouldn't be an issue. I am curious to hear if anybody has any ideas or suggestions.

Here is a picture of the set up in the back of the boat

[slammer]

From the picture it doesn't look like a problem. Maybe put up a side view for a better look? I have the rod that connects the motors for steering. A small bolt with a round ball-like on each motor and the rod has clips on those. Easy on/off. Could you custom bend something to work?

[Coryy]

Here is one option

http://www.seastarsolutions.com/wp-content/uploads/2014/05/6-page-kicker-cable-single.pdf

Here is another option

http://www.go2marine.com/product/210805F/teleflex-marine-tie-bar-adapter-plate-cylinder-kits.html

[Northlander]

I just use my kicker for speed and use my bowmount for all steering. Using a Co or I pilot its a breeze. Much easier than having to be at the wheel all the time.