Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Furnace/Range question


Cooperman

Recommended Posts

The used Ice castle I purchased this past year has all Atwood appliances and the furnace.

I have been happy with the performance.

I will say one thing about the furnace, it works great but they do make a bit of noise when the fan runs. It does not bother me but it is not real quiet.

Not enough noise that if I needed to purchase another, it would not be a deal breaker.

Link to comment
Share on other sites

6.5ft by 16ft V front, so, approx 20ft long from front to rear of the actual house itself. 16,000 btu furnace and it will heat me right out of the place even in -20 temps. Heater does a very good job and I in no way would need a larger one. I do not believe any heater could do any better of a job, like I said though, it does make a little noise when the blower runs. Mine vents out of the bottom of the front cabinets so the warm air blows across the floor. I can adjust the vents to blow the air higher but it keeps the floor so nice and warm and keeps the holes open very nice so thats where I leave it.

Pretty good on propane usage also.

I would suggest that you also add a mud dauber screen on the outdie of the vent. The guy I purchased it from did not have one and the mud daubers crawled into the furnace and plugged it all up. The nests they make are almost like mud and as hard as cement.

Buddy and I took the furnace all apart, cleaned it all out and now it purr's like a kitten.

We did have to take it out and clean it 3 times before we got it all out of there. Once you go through that cleaning job, you will make sure you have a screen on the exhaust outlet.

For the time we spent on it,if a dealer would have spent the time we did, it would have been cheaper to just purchase a new furnace as they can make a real mess of things.

You can google mud daubers and see what they look like, a type of wasp.

Link to comment
Share on other sites

i have a castle also but with the Suburban 40k burned out 1 already but think it was a flaw from factory if i was to pick I'd go with the Suburban 30k will draw a little less power and draw a little less propane so on cold cold days less chance of regular freezing up I would bet malica has got pretty good deals on them also

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.