2010 Tahoe after market heated seats

[cjac]

So, I have a '10 Tahoe that had after market heated seats installed. The driver side isn't working, but the passenger side is. Anyone have any idea on how/where these are wired and where the fuse may be?

It could be the switch but it would be nice if it was as simple as a fuse. Any ideas?

Thanks y'all....

[Macgyver55]

Were these dealer installed or done somewhere else? Its possible that they used the factory fuse location (I would look there first) but being they are aftermarket it could be elsewhere.

Probably the easiest/quickest thing to do would be to find the connector on the seat itself and see if there is voltage there. More times than not I find the element in the seat is the problem.

[cjac]

These were done outside the dealer and are a up/down toggle switch on the seat base vs. the factory controls on the door panel with the window and door controls. So, it makes the fuse panel trace a bit more difficult.

My guess is the element as well, but hoping for a quick and easy. Next step is the voltage assessment and see where I have juice and where I don't.

Thanks Mac