Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

help on bass lures


Guest

Recommended Posts

hi if you guys could help on reel and lure selection for 1 to 4 pound bass i would aprecciate also if you could help me with line selection itd be great thanks a heap

Link to comment
Share on other sites

Bass fishing is one of the fishing sports that it is tough to get by with just one rod. Where do you plan to do most of your fishing, shallow? deep? in cover? reeds? rice? lilly pads? This will help to narrow the basic equipment that I would use for these conditions. When I'm in a tournament, it's nothing to have eight rods with all rigged with something different.

Link to comment
Share on other sites

If I were to have only one rod for bass fishing, it would have to be a 7 foot medium/heavy action baitcaster. With this set-up, you can fish everything from topwaters to Carolina rigs and everything in between.
For line, it's tough to beat 12lb Berkely XT. If you get set-up with this combo, you will be able to catch bass in just about all conditions.
Good luck!

------------------
Adam Johnson
www.adamjohnsonfishing.com

Link to comment
Share on other sites

i usually fish in lily pads, weeds, and deep but im not really into showing off my skills so ive never been to a tournament i have caught only a few fish over three pounds 3 bass and 1 norhtern and ive been fishing 10 years thats sad id like to walk away with a mounter

------------------
drags make music

Link to comment
Share on other sites

If you're serious about it and you've got a little money, here are the three rigs I wouldn't be without:

1. Medium/light action 7 foot graphite spinning rod, spinning reel, 6 lb Berkley XL. This is a finesse rig that's nice for open water crankbaiting, the occasional slip-bobber leech rig (bass love em) and crawling small Texas-rigged worms and grubs along the bottom when the bite's tough. Gotta have a smooth drag or you'll break off fish with that light line.

2. Medium action graphite baitcaster 6-7 feet. Ambassadeur 5500, 12 lb Berkley XL. This is your bread-and-butter rig. You'll fish spinnerbaits in the cabbage and Texas- and Carolina-rigged worms and lizards in deeper water.

3. A big pike rig like a 7 foot graphite baitcaster with a good stiff butt and slow action. Ambassadeur 6500 and 20 lb Berkley XT. This is your rig for surface and other lures in the pads or heavy slop. Pure power to horse those pigs out of cover.

If only one's in your reach, go with No. 2.

And have BLAST! That's what bass are for.

By the way, how big would a mounter be for you?

Link to comment
Share on other sites

a mounter for me has to be at least 6 pounds because ive caught the prettiest 4 lbs smallie mount you ever did see how much would no.2 cost?

------------------
drags make music

Link to comment
Share on other sites

Hey Fishgun,

If I could only take 1 rod with me it would be a 6'6" med action St Croix with a fast action tip. Couple that with a shimano Curado baitcaster and some Berkley Premium Tournament Line and You have a winner...at least in a combo. smile.gif This combo will run you about $225. Just thought I would add me 2 cents...which is probably only worth 1. lol.

Happy Fishing

Link to comment
Share on other sites

Fishgun:

No. 2 would cost, oh, about

$60 to $125 for the Ambassadeur 5500, depending on which model you get. If you get the $60 one, it should last long enough to pass to your kids. The $125 will go to your great grandkids. I bought a black 5500C in 1980 (a lower-end model) that's still working great today.

For the rod, you can spend anywhere from $40 to $400. I don't own a rod that cost more than $70, and they're all good solid graphite rods made by Berkley, Daiwa, Shimano or Fenwick. Just make sure you find one from 6 feet to 6 feet, 6 inches long with a medium action, a stiff butt and a fast tip. I make sure the handles are cork, partly because I like cork and partly because a cheap flimsy rod always seems to have a foam handle.

Here's a hint. Go to Wal-Mart or KMart or, if you're in Bemidji, L&M Fleet Supply. The big chain stores always have better prices on mass-produced name-brand stuff. You can save $20 on the rod/reel combo over going to a fishing store.

So, if you go low end, which is fine and will give you many years of enjoyment (my 5500C is still on the same graphite rod I bought in 1980, although they've got 10 other rod/reel combos for company now) you'll be spending maybe $110 for rod, reel, line.

Heck, there's always Chrismas and birthday presents, if your loved ones will let you scope things out in advance and ask for something specific.

Cheers, and keep your line tight.

------------------
Steve ([email protected])

[This message has been edited by stfcatfish (edited 09-13-2002).]

[This message has been edited by stfcatfish (edited 09-13-2002).]

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.