aquafang Posted January 12, 2013 Share Posted January 12, 2013 Ive had a showdown for several years. The only complaint i have isnot seeing small jigs real well. The other day i noticed that the transducer does not hang perfectly level. Do you think marcum would work with me on getting a new one? Quote Link to comment Share on other sites More sharing options...
mwalleye Posted January 12, 2013 Share Posted January 12, 2013 I have no problem seeing small jigs if I turn the sens. up and I also have had my showdown for a few years and have sent it in a few times and they are top notch in my book good luck though. Quote Link to comment Share on other sites More sharing options...
hookncook Posted January 13, 2013 Share Posted January 13, 2013 I have no problem seeing small jigs if I turn the sens. up and I also have had my showdown for a few years and have sent it in a few times and they are top notch in my book good luck though. +1 I use the foam Vexlar transducer wire holder on mine. it seems to help keep the transducer flat while being easily removed from my hole when pulling fish up. Quote Link to comment Share on other sites More sharing options...
my4x4yj Posted January 13, 2013 Share Posted January 13, 2013 Is there really something wrong with the cord or did it kink slightly when stored in case, sometimes mine gets a slight memory bend in it when real cold after taking coils out of case and I just run cord through my fingers and straighten it out. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.