Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Test drive a Phoenix Boat


Neal

Recommended Posts

Hey guys, We have a 2012 Phoenix 619 fueled up and ready to go. If you or one of your buddies are are in the market for a new boat you have to drive this boat. Give us a call to set up a test drive

Neal

Link to comment
Share on other sites

So, Say a guy all ready has a bass boat. Can I still come drive the phoenix for the heck of it? just giving ya a hard time. They look like sweet boats good luck on the sale.

Link to comment
Share on other sites

careful mww24, you test drive that Pheonix and you might be driving her home. The only thing that stopped me from bying one two years ago was no local dealer then last year one pops up. Bad timing on my part because this is a really well designed and nice driving boat.

Link to comment
Share on other sites

I was driving next to one coming back from Voyageurs last Sunday, I almost drove off the road being so mesmerized by it. They are pretty sweet looking boats, wish I could afford one.

Link to comment
Share on other sites

I think they had one at the bass expo i peeked at. they are nice. But I assure you my pocket book does not allow such purchases. smile Still would love to drive one just because I love bass boats. But would never waste a dealers time unless I was serious to buy.

Link to comment
Share on other sites

hey Neal. I dont know if you want to answer this or not. So if not thats fine. To me it would seem that people in this economy would be buying used boats or smaller boats. yet like you say. The prices keep going up and a 20 footer with a 250 seems to still get marketed more than littler boats. Do boat sales throughout the region still hold up in this economy? I mean I've seen bass boat fully loaded that are close to 70K new. not from you guys but others. It just seems that if anything toy prices would almost start dropping a bit.

Link to comment
Share on other sites

The Phoenix boat is not an old hull with a new name, it is a completely new hull. They are built in the old Bumble Bee factory so a lot of people think that is what they are. There were some boats built under the Bee Line name which were the old Bumble Bee hulls. This was done while the Phoenix line was being developed. They are no longer building any Bee Line boats. They are currently working on a new facility that they should be in by the end of summer. Phoenix boats have some very innovative features that are new to the industry and only found in a Phoenix.

Neal

Link to comment
Share on other sites

In the Phoenix line the 721 with a 250 is the most popular boat nation wide and this is over a $ 50,000.00 boat.I can't speak for boat lines that I don't handle but I would have to guess that the same holds true. The reason boats cost what they do is a pure numbers game on the manufacturing side of things.Example Ford may build 350,000 F 150's so they need 350,000 windshields for that model. A lot of boat companies only build 300 boats a year total so they need fewer individual parts. Volume = buying power from the vendors that supply the parts. Also it takes a week to two weeks or more to build a fiberglass Bass boat vs's how many cars come off the line per day. So untill something changes in the whole process I don't see the price coming down anytime soon. (not saying it's right that's just the way it is) What seems like a lot of money to you and me is not for some other people.

Link to comment
Share on other sites

I wanted to get this off my chest. I don't know where this idea came from that you have to have a 20' boat with a 250 hp on it to go fishing for sport or tounrnament came from. YOU DO NOT. There are many 17' to 18' Bass boats on the market that you can get into for $ 35,000.00 or less. Please buy the boat that fits you and your families needs. Don't buy the boat that everybody including the dealer you are working with tells you need. I have the luxury of fishing out of any new boat I have in stock if I want to but I usually do not. If I use a new boat it is no longer a new boat. My family fishes out of my old 16' aluminum boat with a 25 merc on the back. With that said if I were in the market for a new boat I would look at a 18' or 19' boat with a 150 or 200 on the back at the most. I would buy fiberglass because of the ride and handling. But if fiberglass is not in your budget take a look at some aluminum bass boats there are some nice boats on the market. And remember you and your family are fishing out of it and thats all that matters.

Link to comment
Share on other sites

kudos to you neal for the last post. So very true. I run a 10 year old ranger 17.5 footer with a 130. Plenty of boat for me. Ya if I had 50k+ i would have the big boat but I don't. I liked watching that new major league fishing or whatever it was where all the boats the pros used were 18 footers with 150's and scaled back electronics. Nice to see.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.