Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Your "Go to" lures


Recommended Posts

Bucktail = Mepps Maribou also did well on the Gander Mountain White/Red Bucktail.
Topwater = Top Raider Top Raider Top Raider
Crank Bait = Jakes
Gliders = Slammer Drop Belly Glider
Jerk Bait = Reef Hawg
Creature = BullDawg

Link to comment
Share on other sites

If I had to pick 5 for a day on the water;
#1 -- Jackpot
#2 -- Grinder (spinnerbait)
#3 -- BullDawg
#4 -- Don Slagle's Spring Glider (Homemade)
(store bought would go with 8" Manta)
#5 -- 10" Jake (Casting, Trolling or Twitching)

It would be very hard to hit the water with just 5 lures, but those woulod be my 5. I typically only use 5 or 6 in a day, but want the choice to use any 5 or 6 I want. Usually hit the water with a good 50 lures.

Good Luck!
Steve

Link to comment
Share on other sites

I'm just looking to start collecting some lures for my Muskie arsenal. These all are great leads. Thanks guys, this should save me some money since I won't be getting lures that don't work. At around $15.00 a poke for these type of lures, you don't want to get un-productive lures. Thanks again. smile.gif

Link to comment
Share on other sites

I've always been a big fan of the classic bucktails but I really like the Rad Dog and Pearson's Grinder. Your crank baits such as a Grandma or Jake are always good too. I recently bought a Pacemaker that I am very excited about. Topwaters are my favorite, no matter what kind of fishing, its always enough to get your blood rushing.

Anyone else have a lure they just bought that they are very excited about?

Link to comment
Share on other sites

I don't have any new favorites but I would love to see Rapala make a bigger version of the Husky Jerk. I lost a Muskie 2 years ago reeling in a 20 inch walleye. A funny story... I hooked a fish that felt OK and was reeling it in. My Bro-in-law asked if I needed him to stop the boat and get the net, I said no that it wasn't that big. All of a sudden my rod bent over and the fish started peeling line out like nothing. My bro-in- law said "That doesn't look so small to me." Next the fish went to feeling like dead weight. I reeled in the Walleye and it was dead. There were some killer markings left by the Muskie. Too bad I never got a look at the fish. The pictures we took of the poor Walleye are fun to look back at and think, What if...
Can't wait till Muskie opener. smile.gif

Link to comment
Share on other sites

Thats a cool fish tale Cory. That must have been a big muskie if you were reelin in a 20 inch walleye. All of us fisherman have those unforgetable moments on the water. I have one of my own as well. A few years back, I was bobber fishing for bass,perch, anything really. I was using just some minnows for bait. I had the bobber about 5 feet out from the dock so I could see what was going on. About a 6 inch perch bit my minnow, I started to reel it in when all of a sudden I was frozen after seeing a giant muskie swim underneath my dock. It took a snap at the perch I was reelin in and missed. Still shocked, I didn't reel in. The musky then took a 2nd swipe at it and didn't miss. Before I knew it, I was reelin in a minnow, that was eatin by a perch, that was eatin by a musky. I had the big fish on for a few minutes before I snapped my line. Even though I lost him, its something I will never forget.

Link to comment
Share on other sites

Topwater-Super Topraider (Black with orange dots)
Crankbait-Grandma's (A 53" X 30" made my decision on this one easy)
In-line spinner-Buchertail (Black and Orange once again)
Safety Pin spinnerbait-Rad Dog Jerkbait-Phantom (Heavy so you can chuck it a mile and it's easier to work than a reef hawg)
Plastics-Bulldawg (Black/Glow)

Link to comment
Share on other sites

Corey, My favorite musky lure is the Hawg wabbler in your basic black. I just started musky fishing last year so I don't have a lot of experience. I've really seen some monsters in the Miss. My goal is to get one in the river. I started on a new musky rod. I've sold 2 rods so far. E-mail me at [email protected]

Scotty cool.gif

Link to comment
Share on other sites

I second the motion to make a larger Husky Jerk. I've had small and medium musky go after 'em and it should make a great twitch bait!!
We were trolling the large HJ's in 12' of rocky shoreline on Vermillion last year. Within 50yds of each other my friend boated a 36" northern and I boated a 35" musky. You shoulda seen that poor little Rapala! Teeth gouges the length of the lure and had to change every hook and split ring. I'm gettin' the shakes just thinking about it < ))}}}}}}<<

[This message has been edited by Long Gray Line (edited 04-02-2004).]

Link to comment
Share on other sites

I would recommend Eagle Lake in Hennipen Co. Try a red/white #4 Mepps near the reeds. Make sure you check the regulations on this lake. There are also some really large northerns in here. Use a red/white #4 (no tail) Mepps near the reeds.

Link to comment
Share on other sites

Corey~
I have always enjoyed using glider baits early in the year such as a reef hawg,suick,or bobbie bait. Mid summer I have always stayed with bucktails and topwater. My bucktail of choise has always been the harrasser. Topwater I like the creeper,jackpot,hawgwobbler, late in the year I will almost always do the same as the spring and early summer, fish glide baits and jerk baits used at a slow rate. When fishing on pressured waters such as those in the twin cities, try down sizeing baits use smaller bucks, and even try throwing smaller cranks. I would also recommend on those high pressured days trying to find good reed beds where the fish may ambush to saftey, I hope this helps you land a few more fish. Good Luck, TFerch

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.