Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Spiderwire Stealth line


Recommended Posts

Greetings,

I am pretty new at muskie fishing. Last year I had (I forget the name) a braided line. I was dissapointed with the result of the line because it absorbed water, and I was unable to cast smaller weighted muskie lures. I heard that Spiderwire Stealth is good. Can someone verify this? Also, is there a certain way to tie this onto the reel and tie the leader onto the line? Can anyone recommend another line worthy of muskie fishing? Thanks.

><>
Calvinist
<><

Link to comment
Share on other sites

I did use the Stealth from Spider Wire. It is a good line and I would not be afraid to use again. I did find it wore a little faster than Tuf Line if you use it often. They all wear and you should check your line often no matter what line you are using. There is no sicker feeling than losing a big fish (or a $20.00 lure)to a break in the line. I still prefer Tuf Line in 80lb test.

David Swenson
http://muskieguide.homestead.com/

Link to comment
Share on other sites

The guys I fish with used the Stealth last year and they had multiple snap offs on the professional over run (birds nest). I have used Power Pro in the past and never had any issues with it, last year I decided to try Tuff XP on one of my rods and didn't have any problems with that either. I personally would recommend Power Pro and Tuff ahead of the others.

RU

Link to comment
Share on other sites

Tuff Line stuff is darn good line.
Liked the Whiplash stash I still have and the STEALTH is very simular.
Holds little water.
Very High Knot strenght.
Casts a mile.
Tracks on the reels nice and with thumb and magnets or cluthc adjustments when changeing lures you do limit your Over runs and Snap offs.
smile.gif
Dave mentioned the wear & Tear and I to have seen this.
Oh well, can't have everything.
Think I was trimming back about three feet every so offen and then lost half a spool on time due to a mid-line knot.
frown.gif
Good stuff out there these days.

T.

Link to comment
Share on other sites

many of the guys ( including me!) recomend going with either 65# or 80# in the power pro or tuff lines. this gives you a little larger dia. so it doesn't cut into it self, and lays on the spool well. del

Link to comment
Share on other sites

Hiya,
I used Stealth all last season, and I liked the stuff. Seems to stay round, rather than flattening out, which makes it cast a lot better and lay on the spool better. Does seem to be very abrasion resistant, and doesn't soak up a lot of water compared to other lines I've used. Overall, I was pretty happy with it. I'll be using it again this year.

As far as pound test and so on, I wouldn't use anything less than #65, and I prefer #80 or #100. Couple reasons. One is diameter. With superlines, diameter matters a lot more than break strength. #80 is pretty comparable to the old #36 Dacron which was the standard way back when. The biggest difference is that the new lines have zero stretch, so they don't have the shock absorbing ability the old style lines had. Dacron had a surprising amount of stretch, even though we all used it because it stretched less than mono. Have a dead-stop backlash with #36 dacron, and usually the line would absorb enough of the shock to not snap. Not so with superlines. Figure a 5 oz. bait traveling at however many MPH, coming to a dead stop with zero stretch, and you can see why if you're using the same break strength superline as you would mono or dacron, you can send a bait over the horizon, not to mention the problem of the line cutting into the spool. I made the same mistake when I first started using superlines, and I hated the stuff till I figured out I needed to more or less ignore the break strength rating and pay attention to the diameter. Now I'd never go back to dacron. I DO however use mono at times, and partly because it DOES stretch some...

Anyhow - #65 or #80 is about where you want to be. Anything less than #50 and you may have problems...

Cheers,
RK

Link to comment
Share on other sites

Friends,

I bought the Tuf line in 80lb test. What kind of knots are you using to tie on to your leader? It says on the package to use a triple palomar knot or double uni knot. I found a HSOforum that shows how to tie the uni knot...how is this different from a double uni knot? Any suggestions on which knot I should use?

Thanks,

------------------
<><<><<><
Calvinist
><>><>><>

Link to comment
Share on other sites

Hiya,
double uni-knot is just taking the line and doubling ot over before you tie a regualr Uni.

I've used Uni-knots for years, with Dacron and with superlines. Never had a knot slip, and it's easy to tie..

Cheers,
RK

Link to comment
Share on other sites

Palomar knot!

80lb is great overall line. If you are throwing lures say 2 oz or more - may want to jump up to 100lb.

Tuff is OK line - Tuff XP Plus is better I think....But the Ruler of lines in this catgory is POWER PRO hands down.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.