Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Recommended Posts

So I just got a new Encore Pro Hunter FX. What kind of cleaning is required between shots or every couple shots? Just a wet patch and a dry one? Also, anybody have any experience as to what bullets work well with this gun? I have heard a lot about Barnes?

Link to comment
Share on other sites

I don't have an Encore but an Omega. For sighting in I wet patch and dry after each shot. In a realistic hunting situation you'd be able to get by with just putting down anohter round. I've never had to do that in a hunting situation but have tested it on the range and the accuracy is more than acceptable.

Bullet wise I am REALLY happy with my TC shockwaves. I shoot 100gr (2-50gr pellets) of triple 7.

Link to comment
Share on other sites

I don't have an Encore either; I have a Pedersoli Frontier. For hunting I have been using 295 grain HP Powerbelts with 80 grains of Triple 7 FFG. But that will probably change this year. Last summer I was experimenting with patched round balls and was pleasantly surprised at the nice groups I was getting. At that time I was shooting half powder loads (40 gr) so I could practice trigger control, breathing, etc. This summer I will be shooting full powder loads starting with 80 grains and see what happens at 50 and 100 yards.

As for cleaning, I swab every 4 or 5 shots, depending on how it feels, when I'm at the range. For hunting, I shoot 1 fouling shot before I head into the woods because all my sighing in is done with a "dirty" barrel.

In the end, you just have to spend a lot of time shooting and find out what your gun likes.

Link to comment
Share on other sites

I shoot an encore from before the "pro hunter" days and it is real picky about having a clean bore. It gets tough after a shot or two to seat the next bullet, so while sighting in I'll run a wet patch with bore cleaner through it and then a dry patch. It does shoot the TC shockwaves well. I also shoot 100 grains of triple 7 pellets. Definitely like the groups it'll shoot, but it doesn't like a dirty barrel, that's for sure.

Link to comment
Share on other sites

I found you shoot just as good if not better groups once your barrel gets dirty. In fact, much like one other poster mentioned, I'll pop a cap just to foul the barrel a bit before going out hunting. The problem with the dirty barrel is that after a couple shots it can be a b@$#@^ to get another round down the barrel.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.