Jump to content

  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Ice Conditions

MorningStorm

By MorningStorm
in Ice Fishing

 Share

Recommended Posts

MorningStorm Apprentice

MorningStorm

Posted
Posted

Hello everyone

Sorry guys no pics today we dont catch fish everytime we go out. Up here in Northern minnesota we hit a small backwoods lake on tuesday. The lake was all slush. Good thing I had my danners and ice armour on otherwise i would have been soaked. As we drilled our whole we had water leaking in from all side of the hole and we managed to find some naturally made holes in the ice to fish out of. smile Truck travel is getting sketchy but fourwheelers will still be fine for a few more days with this weather. Better hit the lake now if you want to get one last trip in. Good luck out on the ice guys. Have fun keep your lines tight and BE SAFE.

Link to comment
Share on other sites
KrabbyPatties Mentor

KrabbyPatties

Posted
Posted

Visited a number of small lakes in north-central MN yesterday. Most of them were still locked up and safe-looking but with a few feet of water between the ice and shore on the north ends. A few of the lakes looked like the ice was really degraded and soft and I probably wouldn't have walked on them personally. I did see some guys fishing and using wheelers on a lake in Clearwater County and people fishing on foot elsewhere.

Link to comment
Share on other sites
MorningStorm Apprentice

MorningStorm

Posted
  • Author
Posted

Well in the bemidji area i wouldnt venture on a lake anymore. dark almost black ice. a few guys i know went up to lake of the woods and caught more pike. they said they couldnt get out anywhere except springsteal. almost done almost gone almost time for the boat.

Link to comment
Share on other sites
BP2 Apprentice

BP2

Posted
Posted

springsteel is done too....a group had to be rescued there yesterday...

They were staying at Springsteel and fished out of Warroad by the river which is stupid. I fished out of Springsteel yesterday and it was fine and the fishing was even decent.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Your Responses - Share & Have Fun :)

    • rundrave
      Problems with Yetti

      By rundrave · Posted

      we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • Wanderer
      Problems with Yetti

      By Wanderer · Posted

      I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • rundrave
      Problems with Yetti

      By rundrave · Posted

      reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
    • smurfy
      Just Food and Drink

      By smurfy · Posted

      Chef boyardee pizza from the box!
    • smurfy
      Just Food and Drink

      By smurfy · Posted

      Enchiladas 
    • smurfy
      Just Food and Drink

      By smurfy · Posted

      Venny neck roast!
    • Wanderer
      Merry Christmas

      By Wanderer · Posted

      Or he could go with leech~~~~~
    • Big Dave2
      Merry Christmas

      By Big Dave2 · Posted

      Bear can relate too. Tell Leech to start a new account named Leech5, we'll know who he is.If he has any trouble, Bear can walk him through it.
    • hugonian1
      Merry Christmas

      By hugonian1 · Posted

      Blessed Christmas to all.  
    • SledNeck
      Merry Christmas

      By SledNeck · Posted

      Merry Christmas 

  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

  I accept