Aquaview charging issue

[WalleyeChaser]

Had this posted in the Expert info section but figured I'd post it here as this section gets more views. I recently noticed a charging issue with my unit. It will only stay charged for about 2 hours while using it and it only takes a charge for about an hour and a half before the charger indicates its full. When I take the battery out and hook it directly to my vex charger with full charge indicator light it seems to take a longer, more full charge. So it seems the battery is still good. Is the charger faulty or is it the circuit board that the charger plugs to? Anyone experience the same issues?

Thanks, Paul

[Surface Tension]

Mine had a similar problem.

Take a look at the spade connectors on the Aquaview. They can fit loose making a poor contact.

If they are use a needle nose to squeeze the connector for a tighter fit.

[WalleyeChaser]

I think they were tight but I will give them a little pinch to see if ot helps! Any other ideas if that doesn't work?