2002 XC500 headlight out...

[BoxMN]

I should be able to update on my issue this weekend. Glad it worked out so easy MR for you! Nice fix

[Meat-Run]

Thx BoxMN. If we put are two sleds together we might have one "complete" sled without problems. Ha

MR

[Meat-Run]

P.s. for those who been following this post you can purchase part #H4 light bulbs at Mills FF for $7.95.

Good luck

MR

[BoxMN]

Okay guys, I'm bringing this thread back to life... again... ha!

Tried new bulbs, both are/were working, then I remembered I tried this already last year, doh!

So I went to Tousley, talked to a guy who said it could be one of two things - either the $15 (!!!) blue button that wasn't gripping the switch, or it could be the whole front assembly piece, which is like $60. He told me to try the button first, and if that is not it I could return it and try the other.

It is not the button. I pulled old one off (wish I knew I could do this earlier, cause know I know where the problem is. It is the white "Switch" itself, right behind the button. If I wiggle that with the button off, the Lo light will come on, go off, etc. as I wiggle. So it is the white "plunger style" switch that is bad.

Do you guys know if that is part of the front assembly piece on this model? I will stop this week, and grab the correct part, but wondering if that switch is even part of the "assembly" for $60ish. I looked at online parts schematic and there is nothing listed for that "switch" but there is the assembly listed, and that is it that I can see.

Anyway, at least I found the culprit, haha! This has gone on too darn long, haha!

[BoxMN]

Well, finally fixed it. New front brake control needed, $70, it used to be like $150 or something. Could have found it online cheaper probably, but it is working. I can put this issue to rest, finally

[Meat-Run]

BoxMN that's good to hear, you've been working on that project for a long time.

MR