Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

E-Cat rod for muskies?


Recommended Posts

Hey you rod gurus:

Several years ago, Berkley developed the E-Cat series of rods for catfishermen. They came in numbers 1 through 4 or 5, with the larger numbers being heavier. Berkley no longer makes them ($75 was too much money for most catmen to shell out, I guess).

Like the name suggests, they are E-glass.

I have a No. 3 that's 8 feet long and one piece (the # 1s and 2s had a telescoping butt, but the 3s and 4s didn't).

It's got a good stiff butt section and a slow action, as you'd expect for E-glass, and is rated for 30-lb mono.

It's pretty hefty, but I'm thinking it would be an OK rod for muskies. I'd spool up 50/20 Fireline on an Ambassadeur 6500 or 7000 for it. I've got a couple other good rods for muskies, but just can't see lettting the E-cat gather dust because I've moved away from catland.

Do you think this would be a decent option?

------------------
"Worry less, fish more."
Steve Foss
[email protected]

Link to comment
Share on other sites

guideman:

I figured it'd be a great muskie (or salmon) trolling rod. Was wondering if it's too hefty to use to throw lures all day. I ain't getting any younger. grin.gif

But I see some of these guys talking up 8-foot casting rods. Graphite's a lot lighter than glass, though. I'll just have to try it out and see.

[This message has been edited by stfcatfish (edited 03-11-2003).]

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
    • The water looked and smelled disgusting with hundreds of thousands of birds sh*tting in there.  About as gross as the Salton Sea. When I duck hunted there I didn't even want to touch the water.
    • It's kinda gross with the algae in the summer but I got in it anyway.  Wanted to see the increased bouyancy at work.  You can kinda tuck yourself into a ball and you'll just float with your head above water.  When dry off you look diamond encrusted with the salt.
    • We went to the flats too. I dipped a tire on the rental car onto it just to say I’ve been there,but it was still pretty soft from winter melt. After seeing some moron in a BMW suv get dragged out of the muck I had no intention of repeating his stupidity. 
    • I've been out on the flats. It's like being on a different planet 
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.