Jump to content

  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Cats on Horseshoe Tomorrow!

bowhunt

By bowhunt
in Ice Fishing

 Share

Recommended Posts

bowhunt Community Regular

bowhunt

Posted
Posted

Hopefully it is ok that I post this in the ice fishing section. I want to go after some catfish tomorrow on Horseshoe or one of the chain lakes. I know almost nothing about the area other then some of the posts I have read.

I am just wondering if anyone will be out there tomorrow that would be willing to point me in the right direction. If you have room and want some company that would be even better, but I have a 1 man hub that I will use otherwise. I have wanted to try catching a catfish for a long time just haven't had the chance until now.

Thanks for any advise and information your willing to give me.

Bowhunt

Link to comment
Share on other sites
PFUNK Proficient

PFUNK

Posted
Posted

I too am interested in fishing the horseshoe chain once but I am heading back to school this weekend so it won't happen this season. I fished Long lake a few times in the past with good success but I never had the cloud of fish on the sonar like I have seen on DTro's video. THAT I must experience once. Might wanna check out the St. Cloud area forum too if you haven't yet. Big thread in there that has been going for awhile about cattin' the chain.

Link to comment
Share on other sites
DTro Grand Master

DTro

Posted
Posted

Check out the St Cloud forum for sure. The "Cattin the Chain" thread is one of the best threads each year. Lots of information and tips shared.

You might find that the bite has slowed a bit as it usually does as the year progresses. If I was headed up there, I would try my best to be there as the sun goes up and as the sun goes down.

Good luck!

Link to comment
Share on other sites
bowhunt Community Regular

bowhunt

Posted
  • Author
Posted

Thanks for the advice guys. I did go post in the cattin the chain thread. I can't get up there at sun up because I have to pick up my flasher from Marcum before I head up there. Hopefully I will be able to stay until sundown.

Bowhunt

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Your Responses - Share & Have Fun :)

    • smurfy
      Just Food and Drink

      By smurfy · Posted

      Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • Mike89
      Problems with Yetti

      By Mike89 · Posted

      good luck!!!   
    • rundrave
      Problems with Yetti

      By rundrave · Posted

      we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • Wanderer
      Problems with Yetti

      By Wanderer · Posted

      I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • rundrave
      Problems with Yetti

      By rundrave · Posted

      reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
    • smurfy
      Just Food and Drink

      By smurfy · Posted

      Chef boyardee pizza from the box!
    • smurfy
      Just Food and Drink

      By smurfy · Posted

      Enchiladas 
    • smurfy
      Just Food and Drink

      By smurfy · Posted

      Venny neck roast!
    • Wanderer
      Merry Christmas

      By Wanderer · Posted

      Or he could go with leech~~~~~
    • Big Dave2
      Merry Christmas

      By Big Dave2 · Posted

      Bear can relate too. Tell Leech to start a new account named Leech5, we'll know who he is.If he has any trouble, Bear can walk him through it.

  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

  I accept