Hard plastic tube for firebright leds help where to buy???

[ratherbefishin]

Hey im looking to put my firebright leds strip into a clear tube that does not flex, i want to keep them from flexing in the extreme cold just incase. I did seem some light covers for florescent bulbs but they are to big.....any ideas????

Thanks and be safe on the ice!!!

[DTro]

Well, I used clear vinyl tubing the first time I used these lights and that worked ok, but can be a bit difficult. If you buy from the bottom of the roll at the store, the radius is pretty tight and it makes it difficult to pull the lights through, but if it's a new roll the tubing is much straighter and works good.

I was much too lazy to go through all that in my new house, so this time I just zip tied em "naked" and so far so good.

[dfeste]

Clear acrylic tube. U.S. Plastics is where I got mine.

[harvey lee]

Like Dtro, I tied mine up naked 4 or 5 years ago without 1 issue to date.

[Crappiechopper]

I velcro mine to the poles on my otter, and I take them down while the shack is still warm and store them in a small plastic cooler in the sled.