Jump to content

  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

too big of heater??

redhooks

By redhooks
in Ice Fishing

 Share

Recommended Posts

redhooks Proficient

redhooks

Posted
Posted

Just finished the frame and shell of my first wheelhouse 7x14 w/ a 3 foot V, I'm pretty happy with everything but am now working on the inside and want to get it on the ice ASAP. Question I have is that I bought a 40k BTU suburban vented furnace from a friend and am assuming this thing will keep it plenty warm on a lower setting but don't want overkill. This is my first build and would like to know if this setup will work or if there any potential drawbacks to this setup w/ 2 20 Lb tanks. I plan on placing several vents up high and using some fans for circulation. Thanks for any input.

Link to comment
Share on other sites
remington 300 Community Regular

remington 300

Posted
Posted

i a think 40k heater will be plenty for that size house,i have a 30k in my 8x18 perm and it kicks butt, yours sholud keep it plenty warm on lower settings/less gas usage, so the 2 20lbers should last quite a while, as far as overkill, it will be more heater than you'll ever need.

did you get a good deal on it?

goodluck finishing your house, looks like you may have a little while to finish it with this nice spring weather were haveing.

mike,

Link to comment
Share on other sites
L_Cappo Proficient

L_Cappo

Posted
Posted

i have a 20k btu but my perm house is very well insulated.i use 100lb tank last about 10 to 12 days.heater is always on low like i said its very well insulated.ppl from lotw said i should have atleast a 30 btu up in the cold tundra but my 20 btu works well but then again my house is very well insulated lol

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Your Responses - Share & Have Fun :)

    • Wanderer
      Just Food and Drink

      By Wanderer · Posted

      It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • smurfy
      Just Food and Drink

      By smurfy · Posted

      😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • Mike89
      Just Food and Drink

      By Mike89 · Posted

      I grilled some brats yesterday, maybe next weekend will the next round...  
    • Wanderer
      Just Food and Drink

      By Wanderer · Posted

      You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • smurfy
      Just Food and Drink

      By smurfy · Posted

      Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • Mike89
      Problems with Yetti

      By Mike89 · Posted

      good luck!!!   
    • rundrave
      Problems with Yetti

      By rundrave · Posted

      we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • Wanderer
      Problems with Yetti

      By Wanderer · Posted

      I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • rundrave
      Problems with Yetti

      By rundrave · Posted

      reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
    • smurfy
      Just Food and Drink

      By smurfy · Posted

      Chef boyardee pizza from the box!

  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

  I accept