wheelhouse wall framing?

[low277]

For the guys who have built your own wheelhouses with wood studs, have you screwed the studs together? If using 2x2s (1 5/8 x 1 5/8) are you using 2 screws?

I had thought about ripping my own studs to a true 2" depth and using 2" foam in the walls, 2 screws per stud. Maybe use a kreg jig and pocket screws or would screws from the end be better?

Thanks

[MinnGuy]

I ripped 2x4s in half (one screw each) on the walls and 2x4s in the corners (2 screws) and used 1.5 inch foam isulation. Once the metal was installed it's pretty solid. Adding interior wood should really strengthen it.

[broman]

I made framed walls using only one screw to attach the 2x2 wall studs to the top and bottom studs. Before screwing them together I pre-drilled each hole to prevent the stud from splitting before screwing the bottom and top. I also used a toilet bowl ring wax to help the screws go easier. The toilet bowl wax was new, not used Then I applied flooring adhsive (leftover from a flooring install) to the bottom and to the corner studs. Then I put the walls up and screwed the bottom to the plywood/stud/plywood floor.

[Larry3760]

I used 2x4s sideways I figured by rpping them down id save 100lbs at best so i didn't hassle ripping them, I also used pl premium everywhere for added strenth

[Pleasant]

I use one 3&1/8 inch screw, pre drill the plates, (I prefer T-25 drive screws as in my opinion they are a heck of a lot easier to work with) and use Hot melt adhesive on the ends of the studs. When needed, I will use corner blocks just to keep things plumb and square with the world.

[landscaper]

Yep i also ripped down 2x4s left over from our house and 2x4s in the corners. I cant remember if i used 1 or 2 screws but i also added a piece of tin say 5x5 or something like that and placed that over the joint or where the stud and the top and bottom header meet. Little over kill but i did it and then once you finish the inside or outside it will be solid.( I finish the inside first so i can place headers and stuff where i want it i add a cabinet or something on the walls)

How many guys finish the inside first??