peerchking Posted July 5, 2011 Share Posted July 5, 2011 Anyone have a fix for this other than taking it in Quote Link to comment Share on other sites More sharing options...
rundrave Posted July 5, 2011 Share Posted July 5, 2011 is it just one wheel or both? hard to diagnose with out more infowhen was the last time the you changed the hub fluid? I would try to drain and refill might have to do a couple flushessometimes you also have to drive in reverse for a bit and see if it dis-engages but thats just another indicator to make sure you are doing the routine service to the hubs. Quote Link to comment Share on other sites More sharing options...
Macgyver55 Posted July 5, 2011 Share Posted July 5, 2011 Does the 4x4 indicator stay on or does it go off with the switch? (while it stays in 4wd) Could be a bad or wet switch if the indicator stays lit all the time even when switched off. Quote Link to comment Share on other sites More sharing options...
peerchking Posted July 6, 2011 Author Share Posted July 6, 2011 indicator light goes out with switch,both wheels, and I did change fluid with only one flush- still stuck. I dont mind the harder steering but it's my wifes ride. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.