Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Non-coiling line for spinning reels


luckydave

Recommended Posts

Looking for recommendations on fused or braided line that will avoid line coiling from being used on spinning reels for ice fishing. I'm looking for both walleye and panfish applications. Thanks in advance for your recommendations.

Link to comment
Share on other sites

Hi Dave,

Virtually all line will coil after spending time on either the spool it came on or your reel. The best thing you can do is try to select a low-memory line and make sure to stretch it as you are dropping it down the hole. I know I always have this problem on my Marmish rod. After hand stretching it out at the beginning of the day, I am usually good to go until I hit the lake again.

Tight Lines,

shawno

Link to comment
Share on other sites

Fireline Crystal I have used quite a bit. It does coil, but not like regular fishing line. It's more like the twist coils that sets in over time.

Braids I've used have been Sufix Performance Ice braid. I'm thinking that new Sufix 832 with the sinking feature would benefit well. I've got 50# rigged on a pike baitcasting rod for some pike action.

Link to comment
Share on other sites

no way around it, if you use a spinning reel, you will get line twist/coils.... if you using spoons, tie on a barrel swivel this should reduce coil. braids are better resisting line twist... but you will have to tie in some sort of mono or flouro at some point in your set-up. if you like using mono/flouro try going to a fly reel, they are great for shallow water use, but i've had good luck on deeper water also, down to 30 ft. just takes a bit longer having to pull line out every time. line spooling stations also help.. berkley makes a very affordable one! also next time, don't put too much line on your spool, this will also help, i gennerally keep it approx. 1/8" from the spool lip. since the invention of the modern flasher, it seems those depth finder wights have been put to the wayside... i still use mine however, it tends to stretch and pull the line keeping it from coiling. hope this helps!

Link to comment
Share on other sites

I have been using P-line Fluroclear 6# and 4# sense the ice has been good enough to get out on and have had no real problems with coil or twists. I have one rod that I have 6# on that is 24" and I use for nothing but jigging lures and spoons and use a snap swivel on it and have had no problems with twisting and coiling. I also have one rod that I have the new Lindy Ice line on in 5#, I use it for plain red hooks and jigs and have not had much trouble with it, it seems to coil a little and when the line is not tight has wrapped its self on the drag knob a few times but seems to do a lot better then most lines. It also had some durability as not being bit off by northern pike with no leader. I am happy with both lines and have had a lot less coil and problems then other lines I have used in the past and will be using them in the future.

Last night I was fishing crappies and was to lazy to tie another rod with a plain red hook and sinker so I used my med action rod with the Lindy Line and it seemed to sink faster then my other rod that had pretty much the same set up with 4# P-line Fluroclear.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • Sounds pretty sweet, alright. I will check them out, thanks.
    • If you really want to treat your wife (and yourself) with a remote operated trolling motor, the Minn Kota Ulterra is about easy as it gets.  Auto stow and deploy is pretty awesome.  You just have to turn the motor on when you go out and that the last time you have to touch it.   24V 80lb.  60 inch shaft is probably the right length for your boat.  They ain’t cheap - about $3k - but neither one of you would have to leave your seat to use it all day.
    • Wanderer, thanks for your reply. I do intend for it to be 24 volt, with a thrust of 70-80. Spot lock is a must (my wife is looking forward to not being the anchor person any more).  With my old boat we did quite a lot of pulling shad raps and hot n tots, using the trolling motor. Unlikely that we will fish in whitecaps, did plenty of that when I was younger. I also need a wireless remote, not going back to a foot pedal. We do a fair amount of bobber fishing. I don't think I will bother with a depth finder on the trolling motor. I am leaning toward moving my Garmin depth finder from my old boat to the new one, just because I am so used to it and it works well for me. I am 70 years old and kinda set in my ways...
    • Dang, new content and now answers.   First, congrats on the new boat!   My recommendation is to get the most thrust you can in 24V, assuming a boat that size isn’t running 36V.  80 might be tops?  I’m partial to MinnKota.     How do you plan to use the trolling motor is an important question too.     All weather or just nice weather?   Casting a lot or bait dragging?   Bobber or panfish fishing?   Spot lock?  Networked with depth finders?  What brand of depth finders?
    • We have bought a new boat, which we will be picking up this spring. It is an Alumacraft Competitor 165 sport with a 90 horse Yamaha motor. I will be buying and installing a trolling motor,  wondering if I can get some recommendations on what pound thrust I will want for this boat?  Also, I will be selling my old boat, is there a good way to determine the value on an older boat ( mid-80's with a 75 horse 2-stroke  Mariner motor)  I will appreciate any help with these questions.
    • Sketti...  not out of a jar either!
    • Lol yeah I watched that
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.