Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

  • 0

spongey boat floor


deep channel

Question

8 answers to this question

Recommended Posts

  • 0

wow thats not even 10 yrs old

i had a wood floor in my old boat but it lasted close to 15 yrs

and i was fishing lots of tourments on big water and pounded the heck out of that boat

but then ot was'nt a lund........lol(this will draw some interesting comments..lol)

Link to comment
Share on other sites

  • 0

I thought from reading outdoor forums that Lund had a warrenty on floors??Too many people too many opinions and false info!!!

Took mine in and NO WARRENTY.

Problem with the lund boats, is the foam flotation there's no space below it to let water drain.So it absorbs the water and holds it,Weigh your boat now and again after its replaced.I replaced my own and helped a neighbor with a 14 lund with a floor,I didnt weigh mine but when I finished mine and we started on his,We took the saturated foam and the 8 pieces of foam weighed 126 lbs!!!!!!! ALL WATER.We could ring it out like a rag!

The foam is sprayed right on the aluminum hull floor! Where do you think any water in a rain will go??

Really bad design!!!!

Link to comment
Share on other sites

  • 0

The "closed cell"foam (must be by law)looses it's ability to repel water after just a couple of years.They just don't make anything to last anymore!There are marine stores that sell spray in expandable foam that is expensive but the alternative (sinking to the bottom)may be expensive as well.c63

Link to comment
Share on other sites

  • 0

The "closed cell"foam (must be by law)looses it's ability to repel water after just a couple of years.They just don't make anything to last anymore!There are marine stores that sell spray in expandable foam that is expensive but the alternative (sinking to the bottom)may be expensive as well.c63
If you ever saw closed cell foam installed in a home,it expands beyond the studs,they cut it flush to have a flat surface foe drywall.In the Lund boats I have done they did the same where it expanded beyond the stringers it was cut flush,leaving open cell foam it dont take two years to let water in there,Once the foam is saturated (like the 14 ft,er I stated at 126 lbs of water laden foam no more flotation its actually a detriment for the boats weight limits! No one would ever know their way over weight!!

Foam installed on flat roofs for insulation and water tightness gets treated with a special silicon sealant and it has a 20 yr warrenty.Which leads me to see how Lund is cutting corners,Maybe these forums will point that out and a safer boat will follow????

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Answer this question...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.