northspear Posted October 17, 2010 Share Posted October 17, 2010 just wondering if someone has planes for building a floor for a quickfish. i would like to do that before the season starts. thanks. Quote Link to comment Share on other sites More sharing options...
shamalex72 Posted October 17, 2010 Share Posted October 17, 2010 laska made a floor for his, I think he had some pics of it. He should chime in sooner or later. Quote Link to comment Share on other sites More sharing options...
merkman Posted October 17, 2010 Share Posted October 17, 2010 laska made a floor for his, I think he had some pics of it. He should chime in sooner or later. Quote Link to comment Share on other sites More sharing options...
Laska Posted October 17, 2010 Share Posted October 17, 2010 I will take measurements and a picture of the completed floor tonight. with a list of materials. but its gonna cost ya... lol j/k Pro's Wont freeze down for an all day outing foldable, portable Keeps all light out on the floor; Fold flaps under floor-no need for corner stakes huge hole- 48x34 I believe-n you still feel safe I never slipped Not noisy-carpet is a must weighs roughly 20lbs all together Small Mr. Heater keeps the whole thing warm lots of room for extra gear behind where ya sit. Con's Need a sled to haul it, I had no issues tho, plus gear it all fits ask merk n elwood. Carpet can freeze to itself if not taken inside to dry after use. Hole takes some time to cut not a problem for me tho. Quote Link to comment Share on other sites More sharing options...
Laska Posted October 17, 2010 Share Posted October 17, 2010 Sent merk a pic of the floor completed.Here are the pcs everything is doubled to have 2 sides=everything is 2x2 total pcs7" x 2 464" x 2 421 3/4" x 2 438" x 1 233 1/4" x 1 2Box of 1 1/2" screws for screwing in plywoodbox of 3" screws for framing2-3" hinges6'x6' pc of carpet-outdoor marine carpet is what I used-dont cut at hinge-light leak will occur dimensions ..........10".........____.........|...|.........|...| <---- 26" 65 1/2" |...|_____.........|.....^.....|.........|.23 1/4...|<hinge.........|...........|<------- 39 1/2".........|...........|<hinge.........|________|............33 1/4"So ur plywood should be cut out from- the outside perimeter which is the above awsome picture with measurements.Hope this helps everything should be on here now. (merk save this thread lol)have any questions let me know... Quote Link to comment Share on other sites More sharing options...
merkman Posted October 18, 2010 Share Posted October 18, 2010 Laska asked me to post this pic of the completed floor Quote Link to comment Share on other sites More sharing options...
northspear Posted October 18, 2010 Author Share Posted October 18, 2010 thanks so much for the help. this will help a lot. now its just finding time to build it.lol. but thanks again for all the pictures. Quote Link to comment Share on other sites More sharing options...
Laska Posted October 18, 2010 Share Posted October 18, 2010 Not a problem, thx merk for posting the pic. Shouldn't take you more than 3 solid hours to make. Took me 2 hrs from scratch so yeah it goes quick. Plus you have all the measurements already Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.