Trailer question

[Esox_Magnum]

Ok new sled has no reverse, old plywood bed tilt trailer. What can I put on it to get it off easier. My skinny 145 pounds almost aint enough.

[Reynolds]

They make a plastic piece that has ridges that bolts or screws onto the trailer. This piece keeps the carbide from actually touching the trailer itself. So basically the ski sits on the ridges and the carbide sits in the groove. I think you could find this piece on dennis k site, otherwise I don't think it would be that hard to come up with something on your own. I think your trouble is that the carbide is digging into the plywood. Hope this helps.

[mabr]

If you can find an old truck beddliner that will work good too. Just cut it to fit your trailer where the skis touch.

[cam white]

head to your local menards, pick up 2 10 ft lengths of overhead door channel. I think thats what it was called... looks just like the runners they charge big bucks for. works slick!! Paid 10.00 per 10 ft length.

[Reynolds]

Esox, did you end up putting any guides down on your trailer?

[Esox_Magnum]

Not yet haven't had time to get anywhere to look for anything.