can_cooler Posted December 7, 2009 Share Posted December 7, 2009 For all of you that have a Garmin GPS unit that powers down with even the slightest bump...I put a drop of solder on each negative battery terminal spring, making a constant connection to the terminal board behind the spring. I put the batteries back in, powered it up and dropped it on the counter a few times, which would have for sure killed it prior to this, and it stayed on!!! Quote Link to comment Share on other sites More sharing options...
McGurk Posted December 7, 2009 Share Posted December 7, 2009 Good Idea! I have an etrex Legend B/W that would shut off, too. A fix I tried is to shove some double stick foam tape behind 3 of the 4 terminals to force them to stick out a bit more. I hope it works, too. Quote Link to comment Share on other sites More sharing options...
can_cooler Posted December 7, 2009 Author Share Posted December 7, 2009 Yep, I've tried that one too. It worked for a little while, but after a while, the unit would still power down with any vibrations.Now it stays on all of the time!! Can you tell I'm a little excited. I guess I'm just happy I don't have to go out and buy a new GPS unit. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.