Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Interior Paneling Options


blongtin

Recommended Posts

I've been searching this site at different options on interior paneling. My top choice would be t&g. Well I just bought an 8'x12' house that needs a lot of work, and is very run down. My plan is to use it this year, then strip it down and start all over. I already repaired some damage on the roof, and I also want to do something with the inside walls. it's insulated, which I want to replace some pieces because they're in really bad shape with some extra I have laying around. I would like to put up some sort of paneling. However I don't want it to cost much because next year I might just scrap it anyways. Most paneling I saw at the local store is about $10/sheet. However I saw some sort of hard board sheets that were 1/8" thick that were about $6 per sheet. Pretty dark but they might work.

Does anyone else have any ideas of what I could use?

Link to comment
Share on other sites

I used the 1/8" tongue and groove knotty pine (cabin grade). The cabin grade is not the best, has a few knot holes in it, but it looks great and really sturdies up the walls too. I did the inside of my 8 x 12 for around $125 and I think it turned out pretty good. My Dad put the cheap paneling in his house when he first built it and it really warped and buckled on him, I guess the extreme temperature changes from being really cold to hot when you are using it made it warp and bulge on him. He has since ripped it out and put the tongue and groove in. I bought the wood at Menards, comes in pacs wrapped in plastic, it's been a few years but if I remember right I think one pack covered like 10 square feet or somehthing like that.

Link to comment
Share on other sites

I will probably use that t&g next year when I tear it down and start new.

But I'm looking for temporary ideas. I'm thinking either the $6/sheet panels, or just go out and re-do all of the insualtion with the pink sheets, that way I can re-use the sheets next year when I redo it, either in the walls or in the floor. I'm just worried I might go crazy looking at pink walls/ceiling all winter! smile

Link to comment
Share on other sites

I'm building an 8x12 right now and used the cabin grade t&g from Menards. A couple weeks ago they had a sale buy one get one free. I bought 28 packages, and I may be a little bit short. It ended up being cheaper than almost any of the paneling there, and it will look better and last much longer.

Link to comment
Share on other sites

i think the dark paneling your talking about is masonite or something similar, we put it down over finished floors to prevent scratches when working. if it is only to get you by for the year it will work fine but it will take on any moisture and start swelling and warping very fast. i know they also have luan plywood that is right around the same price, it would look a little better but the glue used to join the plys will not stand up to moisture either and it will start to de-laminate if it gets wet. two buddies and i built a fishhouse last january and used it on the outside with a coat of paint and it held up pretty well, but this summer it started letting go before we got the siding on

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.