Yet, Another PROP ?

[mnhunter79]

Here is what i got. 1995 16 ft. warrior boat. 1995 evinrude 2 stroke 90 hp. about 300? lbs of equip. gas (18 gal.) trolling motor, tackle, anchors, etc..... and usually 2 people. I have two props.... (1) 13 3/8x17 alum. , (2) 13x19 stainless.

The alum. prop gets on plane faster but looses 1.5mph top end.

The stainless prop takes forever to get on plane but has better top end.

RPM's are pretty close to the same.

Would you recommend gettin a 13.25x17 stainless? Would i gain anything with the same diam. and pitch just SS vs. ALUM.? What is the differance between 13" diam. VS. 13 3/8" diam. ?

[harvey lee]

I would call Soderblooms as they are very good as figuring out what prop one will need or will work.

http://soderbloom.com/

[marine_man]

Before you can make any propping decisions you really need to know what your RPM's are at wide open throttle, trimmed out and running at the top end.

marine_man