Dano_the_jigasaurus Posted July 7, 2008 Share Posted July 7, 2008 is there a way to remove an old eva foam handle or old cork handle and rebuild it? with out damaging the blank??thx dan Link to comment Share on other sites More sharing options...
upnorth Posted July 7, 2008 Share Posted July 7, 2008 There are a couple options. 1. you can try immersing the handle in boiling water in hopes of the glue loosening up and being able slide it off.2. you can carefully just cut off the handle and clean up the glue with either some sort of solvent(careful not to get it on the paint of the blank) and or sand it off. Main thing is being careful to not damage the blank underneath the handle. Link to comment Share on other sites More sharing options...
Dano_the_jigasaurus Posted July 9, 2008 Author Share Posted July 9, 2008 thx up north Link to comment Share on other sites More sharing options...
upnorth Posted July 9, 2008 Share Posted July 9, 2008 Glad to help(hope it did a little anyway). Link to comment Share on other sites More sharing options...
Recommended Posts