Guests - If You want access to member only forums on HSO. You will gain access only when you sign-in or Sign-Up on HotSpotOutdoors.

It's easy - LOOK UPPER right menu.

Sign in to follow this  
Followers 0
JimBuck

Advice on a DIY Light Diffuser

3 posts in this topic

Greetings folks. I am in the process of finding a solution for recording video/photos at night on my boat. With the limited amount of space I don't want to drag along much for additional gear. So, I figured I could make a DIY Light Diffuser for the front spotlight of my boat.

Here's the spotlight:

VEC192.jpg

I was wondering if any of you have taken the DIY route and conjured up a light diffuser for your photo/video purposes? I was thinking of a thin type of paper or cloth that could disperse light a bit more evenly. Any thoughts? Cheers.

-J.B.

Share this post


Link to post
Share on other sites

Best el cheapo DIY light diffuser I've seen is the white plastic opaque shower curtain liners. Only cost a few bucks. I built a diffusion tent out of two of them for flower photography, and they work great. You should easily be able to cut out a sheet for your light that you can duct tape to the light cover. And there's plenty of fabric left over for more diffusers if you crack/break the first one.

Share this post


Link to post
Share on other sites

Great idea Steve. Thanks for the tip.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0



  • Posts

    • If this crazy weather keeps up a guy might have to go to the mountains to have enough snow to ride.
    • I purchased a 20v 986 Dewalt brushless and used it with my Nils 8" and could not believe how fast it cut. Very close to my Tanaka motor as far as speed. My plan is to use it with my 6" Nils but wanted to give it a good test and it passed with flying colors. 
    • Pretty sure Bernie had that figured out. After the primaries I voted for "not Trump" You guys haven't picked up that liberals are still going for not Trump, even if that means Mike Pence (who from a political position standpoint is worse for liberals).   Instead you have Trump, a man incapable of taking any form of criticism regardless of how irrelevant it is to anything. Why do I post the crowd sizes? Because Trump, in a speech given only to members of the CIA, thought it was important enough to mention, as well as to have a team of his own people there to applaud when he mentioned the size of the crowds.
    • Here's the exact reason why I encourage everyone to buy the digital readout.  After getting holes drilled and everything setup, I always run my bathroom roof fan/vent to get rid of the moisture as the slush on the floor gets melted.  Yesterday I cranked the fan on max which moves some serious air, but I forgot to crack a window, which caused it to actually suction the CO from my water heater back into the house through a propane line pass through.  I looked up and saw 30ppm on the CO detector, which isn't high, but an indicator that something wasn't right.  All it took was cracking a window and turning down the fan for a minute and it was back to 0.  
    • You do realize the person you wanted to be president couldn't even understand the proper protocol for setting up a cabinet level email account don't you?    
    • I looked into fiberglass a few years back for a build.  I decided against it as it needed a wood backer.  Not sure if there is a different product out there now.  
    • finally got out Friday, put on 75 miles in the heavy drizzle, not the first time I have riden in the rain. the trails were OK, I rode in aitkin co. that doubles the miles I put on in the last two years.
    • they load tested the battery and said it was bad, everything else they said was fine, they put in a new battery. tried it today after sitting since Tuesday, and it started up fine, problem fixed.   I have a 2002 grizz carbed, and that sat for close to 3 months, went to start it this weekend, and it cranked for at least a minute (very cold blooded machine) and it started, it has the same battery that's in the Polaris.
    • Precious snowflake Trump needs a safe space from the media apparently.   I suggest you familiarize yourself with the word kakistocracy, because that appears to be the road we will be traveling down.
    • No,I am saying those who are left with jobs are working for those who Obama is happy to give money to for nothing. He was as bad as it gets in terms of getting people back to work after a recession especially when you factor in the amount of money he spent to do it.
  • Our Sponsors