Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Big Reels for Small lures


HugoBox

Recommended Posts

I appologize in advance if this has already been answered but I couldn't find the previous post. I've been convinced to bump up in size to the 7000 for the big baits. How well will it perform for the small ones? I'm happy that now I'll be able to burn the big dogs without my arm falling off, but should I still keep a c-4 handy for burning Lilly tails and others of that size? Or is this a non-issue as the spool size provides so much more line pickup?

One more - have you noticed any fatigue due to the size and wieght of the 7000?

Link to comment
Share on other sites

Hiya -

Finally getting caught up from my Florida trip...

I throw about everything on a 7000. You can actually throw a small bait a long ways with them (the larger spool holds a lot of inertia when it starts spinning), and light baits are more dependent on the rod than the reel for sure. As far as burning baits, that's why guys started using 7000s in the first place, back when burning Harassers was the thing to do.

I guess I don't notice any more fatigue, but I've been using them since the late 80s so I'm pretty used to them I guess. They do take some getting used to because of the size but really, you'll get used to it in a day or so of use.

Cheers,

Rob Kimm

Link to comment
Share on other sites

Thanks Rob -

Also good news on the book. I'm still in Houston for work for about another month so I'm anxiously waiting on Amazon for the advance order I placed. I need a book to read so I quit blowing so much $$ at the Bass Pro Shops store down here!!

Take care - erik

Link to comment
Share on other sites

I went a bit of a different direction...

I picked up the Shimano Curado 300DSV for the smaller baits. 10.5oz reel on a KT Pro Edge D-Back Med action muskie blank and I have a set-up built for the lighter baits. Keep in mind I'm trying to maximize my comfort and reduce as many weight/fatigue factors I can as a result of back issues.

Levereged a couple big-box retailer promos, gift cards, and the Shimano rebate, so all said and done I'm about $120 lighter in the pocket. Not bad.....

Link to comment
Share on other sites

RK - what's the ratio of the 7000's you use on the smaller baits? With even 4.7:1 on my older Calcutta it feels like you're reelin' like a banshee and the lure isn't coming in very fast. Haven't used my new 7000 yet, it's a 4.1:1 but I was thinking I may experience the same thing. I know the bigger handle and fuller spool of the 7000 will actually be easier, but it's like with a bike on low gear - sure it's easier to pedal, but it seems like you gotta pedal a lot!

Link to comment
Share on other sites

The lower gear does affect your line retrieval rate, but you have to remember that the arbor/spool on the 7000 is much bigger (especially filled with line) than your average reel, so it picks up more. I'm not sure what the +/- difference is, but it's not as bad as it seems.

Link to comment
Share on other sites

Propster... I measured the line retrieve of my 7000iC3 at 28 inches per turn... so concept... You cast a lure 30 yards out... thats about 90 feet... so it'll take you about 45 turns or less to get the lure back to the boat... I could be wrong...

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Yeah it was a beatdown
    • Your kid needs to stay with him!👍
    • My kid was eating in Beverly Hills and ran into this guy. Talked to him a bit and wished him luck in the game tonight.     
    • 🤔as a recovering machinist!🤣🤣that must make me a recovering welder!
    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.