Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

flouro on spinning reel?


Bass Rebel

Recommended Posts

I use flourocarbon on some of my baitcasters but have not tried it on a spinning reel. I have a shimano sahara 2500 that I would like to try the new berkley flouro on. Any suggestions on the heaviest size line I can use that won't come coiling off the reel?

Link to comment
Share on other sites

Line size will depend on what you decide you are going to use this rod for. On my spinning reel I use 8 to 10 lb Berkley 100% Fluorocarbon. Just make sure then when you are putting the line on the reel that you don’t over fill your spool. Make sure that is still a good lip on the bail so that line cant come coiling off. \:\)
Link to comment
Share on other sites

Floro is stiffer and does have a tendancy to coil more so than a regular mono or Copoly!... I have used 8lb with little to no problems, 10 can get a bit hard to deal with at times, unless you under fill the spool, but then you give up casting distance.

Link to comment
Share on other sites

I've experimented with several Fluro's on spinning reels. Just like mono, some fluro's are more stiff that others, and you'll have more issues with the stiffer brands on a spinning reel. Line size is also a factor. The smaller the diameter, the less stiff it seems, and easier to manage on spinning reels.

With that being said, I through 6 to 10 lb lest on my spinning reels. I've had the best luck with Seagaur and Sunline, both from a durability standpoint, and manageability (is that a word?) on spinning reels. Note though that I have not tried them all. Berkeley's line might be OK? I've only used Gamma in 20 LB test on a baitcaster, but it has VERY little memory (less stiff) and I've been extremely happy with it. However it's a little pricey.

Link to comment
Share on other sites

Hiya -

On a 2500 size reel, 8 is probably your upper limit.

Personally, I like bigger spinning reels for most applications - less line twist, longer casts, better balance on longer rods. They can definitely be a plus with fluoro too. I have 4000-size reels for most of my fluoro applications other than drop-shotting where I don't have as much trouble with a slightly under-filled spool.

One other thing that really helps with fluoro is getting into the habit of closing the bail manually rather than snapping it over with the reel handle. Don't totally understand the physics of it but you get a lot less coiling at the start of the retrieve closing the bail manually. It gets to be second nature pretty quickly.

Cheers,

Rob Kimm

Link to comment
Share on other sites

RK's little tip about closing the bail manually is a good idea with all line. The mechanics of a spinning reel and how the bail is flipped by turning the reel handle, puts between a 1/4 to 1/2 a line twist each time... It may not seem like much.. but 100 casts later... you got upwards of 50 twists.. no good!!

Link to comment
Share on other sites

I have been closing the bail manually for as long as I can remember. Never knew about the bail twisting the line but that is a good tip. I don't get much line twist on the summer spinning rigs, but the ice rods, I just can't seem to keep the twist out of them with mono.

Link to comment
Share on other sites

I think one thing that may influence the line size is also which rod, namely the length. Your typical 6 ft rod don't fare as well in bigger reel size, namely the wide spool. As since the line that unwinds from it may 'slap' more and come into contact with the rod and moreso on the first line guide. Smaller reel with smaller spools might match up better in terms of performance. Shimano 2500 is average size, good overall for just about any rod length. 6 ft rods and under use a 1000 or 1500 size. 7 ft rod and over use a 4000 size, it works very well. 10# test on 4000 size reel and 7 ft rod, is a good match up. 6# test on spare spool and reserve that for finesse needs.

Link to comment
Share on other sites

I own two Sahara 2500s.I believe I have both of them spooled with 8lb Vanish Floro. Don't seem to have a problem at all with them, however, I would only go to 10lb max due to the spool size.

Link to comment
Share on other sites

I used to use 6-10lb test on spinning rods, now I tie a flouro leader onto braid with a back to back uni knot. The smaller diameter of braid allows me to go with higher lb tests. I use 20lb braid and different test leaders for different applications.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Yeah it was a beatdown
    • Your kid needs to stay with him!👍
    • My kid was eating in Beverly Hills and ran into this guy. Talked to him a bit and wished him luck in the game tonight.     
    • 🤔as a recovering machinist!🤣🤣that must make me a recovering welder!
    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.