i have a 16' wheel house and theres one bolt that holds the wheel assembly on its bolted through a piece of tubing that holds my leaf spring in place then bolted through the frame and the bolt has 2 nuts on it but it still seems to come loose easily then my wheels tip in but when there tight the house sits fine so i was thinking either weld the nuts together and maybe to the frame? of drill out the bolt and nut and put a pin through it? any help on how to fix this is greatly appreciated
We went to the flats too. I dipped a tire on the rental car onto it just to say I’ve been there,but it was still pretty soft from winter melt. After seeing some moron in a BMW suv get dragged out of the muck I had no intention of repeating his stupidity.
Question
arcticcat400
i have a 16' wheel house and theres one bolt that holds the wheel assembly on its bolted through a piece of tubing that holds my leaf spring in place then bolted through the frame and the bolt has 2 nuts on it but it still seems to come loose easily then my wheels tip in but when there tight the house sits fine so i was thinking either weld the nuts together and maybe to the frame? of drill out the bolt and nut and put a pin through it? any help on how to fix this is greatly appreciated
Link to comment
Share on other sites
2 answers to this question
Recommended Posts