Coon Posted January 12, 2008 Share Posted January 12, 2008 Any idea why my heater blows cold air when it's set around the ¾ mark? Above and below this setting it's ok. 2003 Toyota Highlander. Thanks Link to comment Share on other sites More sharing options...
0 tipemup Posted January 12, 2008 Share Posted January 12, 2008 thermostat is prob bad, try burbing the system first and if that doesnt work its probably the stat Link to comment Share on other sites More sharing options...
0 Coon Posted January 12, 2008 Author Share Posted January 12, 2008 What do you mean burbing? And where is the stat on this thing? Thanks Link to comment Share on other sites More sharing options...
0 Jeremy airjer W Posted January 13, 2008 Share Posted January 13, 2008 It is not the thermostat! If the t-stat was bad there would be limited heat at any setting (if the stat was stuck open) which is not the case. Likely there is either a problem with the temp control switch or the hot and cold blend door actuator. I woulod suggest a call or trip to the dealer to see if it 1. a known issue and 2. if they are aware of a fix. Likely you will fall into the "need diagnostic time" catagory. Link to comment Share on other sites More sharing options...
0 Coon Posted January 13, 2008 Author Share Posted January 13, 2008 bummer..ok i'll let yas know...thanks Link to comment Share on other sites More sharing options...
Question
Coon
Any idea why my heater blows cold air when it's set around the ¾ mark? Above and below this setting it's ok. 2003 Toyota Highlander.
Thanks
Link to comment
Share on other sites
4 answers to this question
Recommended Posts