Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

gas vs. electric augers


jayesswhy

Recommended Posts

On a similiar note what does anyone who has seen the icegator electric auger think? They were supposed to be at the show in Minn last weekend. They are talked up quite a bit on our local ice fishing board. Was wondering what The fishermen in the Midwest were thinking on them.

Spike

Link to comment
Share on other sites

First off, welcome to the site!!! laugh.gif

Strikemaster makes the best augers in my opinion and the electric augers are sweet. They can drill about 15-20 holes through 2 feet of Ice on a single charge. There is also a car charger you can get for charging on the fly. I'd also recommend getting an extra battery in case you plan on drilling a ton of holes. There is also a cord so you can plug it into a car/atv battery. The electric augers would also be very handy in a permanent house.

If I had a choice between the two I'd go with the gas powered ones because I like to drill a lot of holes when I go fishing. grin.gif If you know where you want to fish and are content drilling a handful of holes than the electric auger would fit you fine.

If you have any other questions about their augers I'd give them a call and they'd be happy to answer your questions. Otherwise just ask around here and you'll probably find the answers you're looking for.

Good luck,

Corey Bechtold

Link to comment
Share on other sites

I fished with my supervisor last year on LOW and we both work on 12 volt systems for a living and he bought the Strikemaster Electra Lazer. I was so impressed that I bought one this year.

We were fishing with two other guys and they were using a Strikemaster Lazer 10" and my supervisor had the electric 8". We drilled 5 holes through 4' of ice faster than the 10" drilled 4 holes and it still had charge. We then put the charger on it in the truck and let it run and it was ready to go again when we wanted to move.

What I like about is, you just make sure the battery is charged and push the button and start drilling. Don't have to fight with starting, choking, and engine dying half way through the hole. No more spilling gas on your hands and clothes, works great for reopening holes in the perm.

All around great auger. I have 2 extra batteries to carry with and I can either use them for the auger or Marcum.

Link to comment
Share on other sites

I have a Srike master electric auger 7 inch and a 8 inch jiffy gas. They both have their place. I like the electric for early ice and anytime I know where I want to be and dont have to drill a lot of holes. If I want to move around and drill a lot of holes if the ice is thick I use the gas. About 90% of the time I use the electric. Even if you do want to drill a lot of holes just drive the 4 wheeler or sled and septup a DC outlet if not equipt and you can drill as many holes as you want with the cable that has battey clamps that comes with the electric auger.

Link to comment
Share on other sites

The auger comes with a charger that plugs in a 12V cig lighter outlet to charge the battery. You will need to run the ATV while charging as you need more output from your stator. Same when in a vehicle to charge. You need 13.5V or greater to charge 12V batteries. Most ATV's will usually run 14.5V under normal conditions. Lower at idle and depending on any other accessories or lights that are on.

The auger also comes with a cable with mini battery clips (jumper cable style) to connect directly to any 12V battery in a car, truck, atv, snowmobile, or the battery in you permanent house.

Link to comment
Share on other sites

I love my strike master electra - It amazes me how many hoes it can go through - and it is just a vexilar battery - so I have run the battery low so that it would not cut ice, but it will run my vex so I pull off the switcheroo!

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Truly sorry to hear that duffman! I know that feeling.  Keep the good memories  
    • Chamois passed away this weekend a couple days short of her 13th bday. What a great dog to hang out with here at home and on distant adventures. Gonna miss ya big time my little big girl.
    • Sounds pretty sweet, alright. I will check them out, thanks.
    • If you really want to treat your wife (and yourself) with a remote operated trolling motor, the Minn Kota Ulterra is about easy as it gets.  Auto stow and deploy is pretty awesome.  You just have to turn the motor on when you go out and that the last time you have to touch it.   24V 80lb.  60 inch shaft is probably the right length for your boat.  They ain’t cheap - about $3k - but neither one of you would have to leave your seat to use it all day.
    • Wanderer, thanks for your reply. I do intend for it to be 24 volt, with a thrust of 70-80. Spot lock is a must (my wife is looking forward to not being the anchor person any more).  With my old boat we did quite a lot of pulling shad raps and hot n tots, using the trolling motor. Unlikely that we will fish in whitecaps, did plenty of that when I was younger. I also need a wireless remote, not going back to a foot pedal. We do a fair amount of bobber fishing. I don't think I will bother with a depth finder on the trolling motor. I am leaning toward moving my Garmin depth finder from my old boat to the new one, just because I am so used to it and it works well for me. I am 70 years old and kinda set in my ways...
    • Dang, new content and now answers.   First, congrats on the new boat!   My recommendation is to get the most thrust you can in 24V, assuming a boat that size isn’t running 36V.  80 might be tops?  I’m partial to MinnKota.     How do you plan to use the trolling motor is an important question too.     All weather or just nice weather?   Casting a lot or bait dragging?   Bobber or panfish fishing?   Spot lock?  Networked with depth finders?  What brand of depth finders?
    • We have bought a new boat, which we will be picking up this spring. It is an Alumacraft Competitor 165 sport with a 90 horse Yamaha motor. I will be buying and installing a trolling motor,  wondering if I can get some recommendations on what pound thrust I will want for this boat?  Also, I will be selling my old boat, is there a good way to determine the value on an older boat ( mid-80's with a 75 horse 2-stroke  Mariner motor)  I will appreciate any help with these questions.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.