Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Snow on thin ice?


CB34

Recommended Posts

With the forcasted snow this weekend, what are your thoughts on how this might effect the thin ice already on some of the lakes?

I am a little bummed that it might make for poor ice conditions.

Link to comment
Share on other sites

I would say that depending on where you on in the state, the snow will have a great affect on the ice conditions. I know up here we have already had postings of 4-6" of ice on smaller lakes and bays. This week has been a good ice making week for us. Our forcast calls for 2-5 inches of snow, so chances are it wouldn't have a huge affect. On the same note less ice down south + 6-10" of snow = Sketchy conditions.

Regardless if you venture out, make your own judgment call and check your own ice. It is going to vary way to much on size of lake, amount of snow on the lake and how good the week was for you in making ice.

Good luck and be careful!

CA

Link to comment
Share on other sites

The one thing to look forward to is the high winds. I know they don't help make ice, but they will keep some of the snow from covering the ice. At least a little. But I too am concerned. Could really mess things up.

Link to comment
Share on other sites

With heavy snow on the ice, it forces water up onto the ice thru cracks, etc. and causes a layer of slush that can remain for a long time. The snow insulates it from freezing. You may get multiple layers of ice, slush, ice, and snow.

Link to comment
Share on other sites

I'm more concerned about the moisture content of the snow and the wind speed.

Heavy, wet and little wind would be undesirable.

Dry powder with decent wind would be good, as the snow cover would help hold temps down in the weeks to come.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Truly sorry to hear that duffman! I know that feeling.  Keep the good memories  
    • Chamois passed away this weekend a couple days short of her 13th bday. What a great dog to hang out with here at home and on distant adventures. Gonna miss ya big time my little big girl.
    • Sounds pretty sweet, alright. I will check them out, thanks.
    • If you really want to treat your wife (and yourself) with a remote operated trolling motor, the Minn Kota Ulterra is about easy as it gets.  Auto stow and deploy is pretty awesome.  You just have to turn the motor on when you go out and that the last time you have to touch it.   24V 80lb.  60 inch shaft is probably the right length for your boat.  They ain’t cheap - about $3k - but neither one of you would have to leave your seat to use it all day.
    • Wanderer, thanks for your reply. I do intend for it to be 24 volt, with a thrust of 70-80. Spot lock is a must (my wife is looking forward to not being the anchor person any more).  With my old boat we did quite a lot of pulling shad raps and hot n tots, using the trolling motor. Unlikely that we will fish in whitecaps, did plenty of that when I was younger. I also need a wireless remote, not going back to a foot pedal. We do a fair amount of bobber fishing. I don't think I will bother with a depth finder on the trolling motor. I am leaning toward moving my Garmin depth finder from my old boat to the new one, just because I am so used to it and it works well for me. I am 70 years old and kinda set in my ways...
    • Dang, new content and now answers.   First, congrats on the new boat!   My recommendation is to get the most thrust you can in 24V, assuming a boat that size isn’t running 36V.  80 might be tops?  I’m partial to MinnKota.     How do you plan to use the trolling motor is an important question too.     All weather or just nice weather?   Casting a lot or bait dragging?   Bobber or panfish fishing?   Spot lock?  Networked with depth finders?  What brand of depth finders?
    • We have bought a new boat, which we will be picking up this spring. It is an Alumacraft Competitor 165 sport with a 90 horse Yamaha motor. I will be buying and installing a trolling motor,  wondering if I can get some recommendations on what pound thrust I will want for this boat?  Also, I will be selling my old boat, is there a good way to determine the value on an older boat ( mid-80's with a 75 horse 2-stroke  Mariner motor)  I will appreciate any help with these questions.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.