Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Morson Fall Muskie Reports


Recommended Posts

We were up from Oct 5-14 and got 3 - 38, 42 and 46 - in about 10 hours of trolling. All 3 were caught on 10" Jakes trolling the rocky shoreline breaks in 12-20'. Water temp had dropped to low 50s by the time we left, but for some reason the algae was starting to get thick in Miles Bay. The water was clear out west of Rubber.

Link to comment
Share on other sites

Excellent report! Thank you! I'm really hoping the wind stays low to allow us to travel West this year. We usually take off from BV Resort and head East toward Nestor. There's a lot of good fishing that direction but I'd like to try something different. Sounds like you did VERY well on 10 hours of trolling! Hope to have the same luck. Be back on here in a week with my report.

Link to comment
Share on other sites

OK. So it turns out, as much as I enjoy muskie fishing, I'm not very good at it! I caught one 37" and that's it. We fished for about 10 hours total and put on over 45 miles chasing those *&%$ things around the islands. We trolled and casted every plug and bucktail in the box on some really fishy looking water and couln't get them to hit for some reason. Anyway, I had a blast trying. The one I landed came off a wind blown point south of Boomstick.

Good luck to you other muskie hunters this fall!

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.